{"title":"Shop Standard Mold Components","description":"\u003cp\u003eStandard mold components you can order online in USD, in fixed pack sizes, without waiting for a quotation. These are the metric parts a tool room replaces most often, priced per pack with the size chosen at checkout.\u003c\/p\u003e\n\n\u003ch2\u003eEjection system\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSKD61 nitrided ejector pins\u003c\/strong\u003e — packs of 10, one size per pack. Vacuum hardened then nitrided to 60±2 HRC at the surface over a 42±2 HRC core. The two-level hardness is deliberate: the hard case resists wear where the pin rubs, and the tougher core absorbs side load instead of snapping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThrough-hardened ejector pins\u003c\/strong\u003e — packs of 10, hard the whole way through rather than just at the surface. Use these where the resin is abrasive, or where your shop cuts and regrinds pins in-house, since a nitrided pin loses its case the moment you grind the diameter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStepped ejector pins\u003c\/strong\u003e — nitrided SKD61, packs of 5, sized P x D x L - N. Packs of 5 because a stepped pin normally replaces one for one rather than in batches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade (flat) ejector pins\u003c\/strong\u003e — packs of 5, chosen W x P x D x L, in nitrided or through-hardened grades, for thin ribs and narrow bosses where a round pin will not fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn pins\u003c\/strong\u003e — sets of four. Replacing one of four cocks the ejector plate and bends the pins on the other three, so they are sold and changed as a set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStop posts \/ ejector plate limit posts\u003c\/strong\u003e — S45C, sets of four. They set return travel and keep plate faces off each other. Height match across the set matters more than the nominal height.\u003c\/p\u003e\n\n\u003ch2\u003eDie springs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e65Mn rectangular-wire die springs\u003c\/strong\u003e in three JIS load classes: yellow extra light (TF\/SWF), blue light (TL\/SWL) and red medium (TM\/SWM), packs of 2.\u003c\/p\u003e\n\u003cp\u003eTwo things to check before ordering. First, colour is not universal — ISO 10243 assigns the same colours to different classes, and yellow and green are exact inversions between the two systems. Order by outside diameter, free length and load class in words, never by colour alone. Second, maximum compression is quoted against a cycle count: a yellow spring is about 50% of free length at 300,000 cycles but about 40% at one million. Size a long-run tool against the one-million figure.\u003c\/p\u003e\n\n\u003ch2\u003eRunner and sprue\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eC-type sprue bushings\u003c\/strong\u003e — metric sizes. Tell us your nozzle seat radius (SR) and gate hole diameter at checkout and we confirm both in writing before anything is cut. Bore-to-seat concentricity, not orifice size, is what usually causes drool at the nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZ-type runner puller pins\u003c\/strong\u003e — hardened, packs of 10. The end form has to match how your runner releases.\u003c\/p\u003e\n\n\u003ch2\u003ePositioning and fastening\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMetric locating rings\u003c\/strong\u003e — single pieces, sized as outside diameter – bore × thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade 12.9 shoulder screws (stripper bolts)\u003c\/strong\u003e — packs of 2. Specified by shoulder diameter and shoulder length, not by the thread. The shoulder must be slightly longer than the part it passes through, or tightening clamps the moving part solid.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing a size for a replacement part\u003c\/h2\u003e\n\u003cp\u003eFor a straight replacement in an existing tool, matching the diameter and overall length is normally enough. Two things catch people out:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting a nitrided pin to length\u003c\/strong\u003e removes the hard case at the cut face. That is fine at the head end, but not if the cut end becomes the working end running in a bushing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasuring a worn locating ring\u003c\/strong\u003e rather than the platen hole means you locate to the wear, not to the centre. Measure the machine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDocumentation and packing\u003c\/h2\u003e\n\u003cp\u003eMaterial certificates and hardness reports can be supplied on request — tell us what your quality system needs and the scope is confirmed in writing. Ground surfaces are oiled and individually sleeved, packed with VCI paper and desiccant in a rigid box, because ground steel travelling by air or sea will rust if it is packed loose.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to use the RFQ route instead\u003c\/h2\u003e\n\u003cp\u003eUse \u003ca href=\"\/collections\/custom-drawing-based-mold-components-request-a-quote\"\u003eCustom \u0026amp; Drawing-Based Mold Components\u003c\/a\u003e for non-standard dimensions, drawing-defined geometry, different materials or hardness, tighter tolerances, or volume pricing. If you are not sure whether a standard part will do the job, send the drawing and we will tell you — including when the standard part is the cheaper answer.\u003c\/p\u003e","products":[{"product_id":"skd61-nitrided-ejector-pins-pack-of-10","title":"SKD61 Nitrided Ejector Pins — Pack of 10","description":"\u003cp\u003eStandard SKD61 nitrided ejector pins for injection-mold maintenance and replacement. Sold in packs of 10. Sizes are given as \u003cstrong\u003epin diameter × overall length\u003c\/strong\u003e in millimetres.\u003c\/p\u003e\n\n\u003ch2\u003eStandard specification\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSKD61 (JIS G4404), equivalent to H13 \/ 1.2344\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTreatment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVacuum processing + gas nitriding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCase hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e700–900 HV on the nitrided surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCore hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e35–42 HRC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiameters stocked\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ1, 1.5, 2, 2.5, 3, 4, 5, 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLengths stocked\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100, 150, 200, 300 mm (varies by diameter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA note on how nitride hardness is quoted\u003c\/h2\u003e\n\u003cp\u003eA nitrided case is quoted in Vickers (HV), not Rockwell C. The case is only a few hundredths of a millimetre deep, so a Rockwell C indenter pushes through it into the softer core and reads low — any nitrided pin sold with a single \"60 HRC surface\" figure is quoting a conversion, not a measurement.\u003c\/p\u003e\n\u003cp\u003eCore hardness is a genuine HRC figure and is the one that matters for whether the pin bends or snaps under side load. \u003cstrong\u003eWe confirm the measured case and core values for your batch in writing before shipping\u003c\/strong\u003e, and a hardness report can be supplied with the order. If your incoming inspection tests to a specific standard, tell us which and we will make sure the certificate matches it.\u003c\/p\u003e\n\n\u003ch2\u003eWhich pin do you actually need?\u003c\/h2\u003e\n\u003cp\u003eWe stock three ejector pin types, and they fail differently:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNitrided SKD61\u003c\/strong\u003e (this page). Hard case, tough core. The general-purpose choice, and the right one for long thin pins or any tool with side load or slight misalignment — the soft core lets the pin bend rather than snap.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/through-hardened-ejector-pins-pack-of-10\"\u003eThrough-hardened\u003c\/a\u003e. Hard all the way through — 48–52 HRC in SKD61, higher in high-speed steel grades. Better wear life on abrasive and glass-filled resins, and it stays hard where you cut or regrind it. Less forgiving of shock.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/skd61-nitrided-stepped-ejector-pins-pack-of-5\"\u003eStepped (shouldered)\u003c\/a\u003e. A thin tip on a larger shank, for ejecting off small features without running a fragile pin the full length of the plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blade-ejector-pins-flat-ejector-pins-pack-of-5\"\u003eBlade (flat)\u003c\/a\u003e. For thin ribs and narrow bosses a round pin cannot reach. Needs an anti-rotation feature in the plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe short rule: pins wearing out → through-hardened. Pins breaking → nitrided. Pins buckling → stepped, or a larger diameter.\u003c\/p\u003e\n\n\u003ch2\u003eCutting to length\u003c\/h2\u003e\n\u003cp\u003eOrder the next length up. Ejector pins are cut to length at the working (tip) end and then finished flush with the cavity surface. The head is never cut — it locates the pin in the ejector retainer plate.\u003c\/p\u003e\n\u003cp\u003eThe cut face is core material (35–42 HRC), not nitrided case. For a flat tip face in most tools that is fine. If the tip face is contoured to the part, or runs against abrasive or glass-filled resin, choose a \u003ca href=\"\/products\/through-hardened-ejector-pins-pack-of-10\"\u003ethrough-hardened pin\u003c\/a\u003e, which stays hard where you cut it.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing a size\u003c\/h2\u003e\n\u003cp\u003eStart with the working diameter and overall length, then verify head diameter, head thickness, tip condition and any fit-critical tolerances before ordering. If you are replacing a pin in an existing tool and the old one was already cut, measure the plate stack rather than the old pin.\u003c\/p\u003e\n\n\u003ch2\u003eNeed something else?\u003c\/h2\u003e\n\u003cp\u003eDiameters up to Ø20, lengths to 500 mm, special hardness or case depth, and non-standard heads are all available. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e with your size and quantity and we will respond within one business day.\u003c\/p\u003e\n\n\u003ch2\u003eDocumentation\u003c\/h2\u003e\n\u003cp\u003eMaterial certificates and hardness reports can be provided with your order. Tell us what your quality system requires and we will confirm the scope — and any cost — in your quotation.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. See \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePackaging images are illustrative. Actual protective materials and carton format vary with size, quantity and shipping route.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eReplacement and RFQ guides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/how-to-measure-replacement-ejector-pin-without-drawing?utm_source=product\u0026amp;utm_medium=internal\u0026amp;utm_campaign=replacement_ejector_pin\"\u003eHow to measure a replacement ejector pin without a drawing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/how-to-specify-custom-ejector-pins-rfq?utm_source=product\u0026amp;utm_medium=internal\u0026amp;utm_campaign=custom_ejector_pin_rfq\"\u003eHow to specify a custom ejector pin for quotation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/mold-component-bom-rfq-checklist?utm_source=product\u0026amp;utm_medium=internal\u0026amp;utm_campaign=mold_component_bom\"\u003eMold component BOM RFQ checklist for buyers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Privley Mold Components","offers":[{"title":"1 × 100","offer_id":52257948893404,"sku":"PMC-EJEC-001","price":14.9,"currency_code":"USD","in_stock":true},{"title":"1 × 150","offer_id":52257948926172,"sku":"PMC-EJEC-002","price":16.9,"currency_code":"USD","in_stock":true},{"title":"1 × 200","offer_id":52257948958940,"sku":"PMC-EJEC-003","price":21.9,"currency_code":"USD","in_stock":true},{"title":"1.5 × 150","offer_id":52257948991708,"sku":"PMC-EJEC-004","price":16.9,"currency_code":"USD","in_stock":true},{"title":"2 × 150","offer_id":52257949024476,"sku":"PMC-EJEC-005","price":14.9,"currency_code":"USD","in_stock":true},{"title":"2 × 200","offer_id":52257949057244,"sku":"PMC-EJEC-006","price":16.9,"currency_code":"USD","in_stock":true},{"title":"2 × 300","offer_id":52257949090012,"sku":"PMC-EJEC-007","price":19.9,"currency_code":"USD","in_stock":true},{"title":"2.5 × 200","offer_id":52257949122780,"sku":"PMC-EJEC-008","price":15.9,"currency_code":"USD","in_stock":true},{"title":"3 × 150","offer_id":52257949155548,"sku":"PMC-EJEC-009","price":12.9,"currency_code":"USD","in_stock":true},{"title":"3 × 200","offer_id":52257949188316,"sku":"PMC-EJEC-010","price":13.9,"currency_code":"USD","in_stock":true},{"title":"4 × 100","offer_id":52300805832924,"sku":"PMC-EJEC-011","price":12.9,"currency_code":"USD","in_stock":true},{"title":"4 × 150","offer_id":52300805865692,"sku":"PMC-EJEC-012","price":13.9,"currency_code":"USD","in_stock":true},{"title":"4 × 200","offer_id":52300805898460,"sku":"PMC-EJEC-013","price":14.9,"currency_code":"USD","in_stock":true},{"title":"4 × 300","offer_id":52300805931228,"sku":"PMC-EJEC-014","price":17.9,"currency_code":"USD","in_stock":true},{"title":"5 × 100","offer_id":52300805963996,"sku":"PMC-EJEC-015","price":13.9,"currency_code":"USD","in_stock":true},{"title":"5 × 150","offer_id":52300805996764,"sku":"PMC-EJEC-016","price":14.9,"currency_code":"USD","in_stock":true},{"title":"5 × 200","offer_id":52300806029532,"sku":"PMC-EJEC-017","price":15.9,"currency_code":"USD","in_stock":true},{"title":"5 × 300","offer_id":52300806062300,"sku":"PMC-EJEC-018","price":18.9,"currency_code":"USD","in_stock":true},{"title":"6 × 100","offer_id":52300806095068,"sku":"PMC-EJEC-019","price":14.9,"currency_code":"USD","in_stock":true},{"title":"6 × 150","offer_id":52300806127836,"sku":"PMC-EJEC-020","price":15.9,"currency_code":"USD","in_stock":true},{"title":"6 × 200","offer_id":52300806160604,"sku":"PMC-EJEC-021","price":16.9,"currency_code":"USD","in_stock":true},{"title":"6 × 300","offer_id":52300806193372,"sku":"PMC-EJEC-022","price":19.9,"currency_code":"USD","in_stock":true},{"title":"3 × 300","offer_id":52300806226140,"sku":"PMC-EJEC-023","price":16.9,"currency_code":"USD","in_stock":true},{"title":"2.5 × 300","offer_id":52300806258908,"sku":"PMC-EJEC-024","price":17.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/skd61-ejector-pins-pack-hero-v2.png?v=1788930279"},{"product_id":"blue-die-springs-light-load-pack-of-2","title":"Blue Die Springs, 65Mn Rectangular Wire — TL\/SWL Light Load — Pack of 2","description":"\u003cp\u003eBlue rectangular-wire die springs in 65Mn spring steel, electrophoretic-coated, for mold and die maintenance or replacement. Sold in packs of 2. Sizes are given as \u003cstrong\u003eoutside diameter × free length\u003c\/strong\u003e in millimetres.\u003c\/p\u003e\n\n\u003ch2\u003eLoad class — read this before ordering\u003c\/h2\u003e\n\u003cp\u003eThese springs follow the \u003cstrong\u003eJIS-style colour system, where blue is TL — light load\u003c\/strong\u003e. It is the general-purpose middle of the three classes we stock.\u003c\/p\u003e\n\u003cp\u003eThis is not the same as ISO 10243, where blue means \u003cem\u003emedium\u003c\/em\u003e load. If your drawing or your existing tool calls out an ISO blue spring, these are softer than what you are expecting. When in doubt, work from the load values below rather than from the colour.\u003c\/p\u003e\n\n\u003ch2\u003eMaximum compression depends on the life you need\u003c\/h2\u003e\n\u003cp\u003eCompression limits are quoted against a cycle count, and confusing the two figures is the commonest reason die springs fail early. For blue TL:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCycle life\u003c\/th\u003e\n\u003cth\u003eMax compression (% of free length)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e300,000 cycles\u003c\/td\u003e\n\u003ctd\u003e40%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e500,000 cycles\u003c\/td\u003e\n\u003ctd\u003e36%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1,000,000 cycles\u003c\/td\u003e\n\u003ctd\u003e32%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolid (reference only)\u003c\/td\u003e\n\u003ctd\u003e43%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDesign a long-run production tool against the 32% figure and treat 40% as a short-life limit rather than as headroom. The solid figure is a reference for clearance calculations, not an operating condition. A spring that comes back out shorter than its original free length has already been over-compressed and will not recover.\u003c\/p\u003e\n\n\u003ch2\u003eMaximum compression load by outside diameter\u003c\/h2\u003e\n\u003cp\u003eBlue TL, at 40% compression — the 300,000-cycle basis. These values depend on outside diameter alone: an 8 × 60 spring has the same limit load as an 8 × 20. Free length changes the available stroke, not the peak force. \u003cstrong\u003eFor the one-million-cycle basis (32%), multiply by 0.8.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOD (mm)\u003c\/th\u003e\n\u003cth\u003eID (mm)\u003c\/th\u003e\n\u003cth\u003eMax load (kgf)\u003c\/th\u003e\n\u003cth\u003eMax load (N)\u003c\/th\u003e\n\u003cth\u003eMax load (lbf)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e78\u003c\/td\u003e\n\u003ctd\u003e17.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e98.1\u003c\/td\u003e\n\u003ctd\u003e22.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e14.5\u003c\/td\u003e\n\u003ctd\u003e142.2\u003c\/td\u003e\n\u003ctd\u003e32.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003ctd\u003e206\u003c\/td\u003e\n\u003ctd\u003e46.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e275\u003c\/td\u003e\n\u003ctd\u003e61.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e343\u003c\/td\u003e\n\u003ctd\u003e77.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003e43\u003c\/td\u003e\n\u003ctd\u003e422\u003c\/td\u003e\n\u003ctd\u003e94.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e54\u003c\/td\u003e\n\u003ctd\u003e530\u003c\/td\u003e\n\u003ctd\u003e119.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e67\u003c\/td\u003e\n\u003ctd\u003e657\u003c\/td\u003e\n\u003ctd\u003e147.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e12.5\u003c\/td\u003e\n\u003ctd\u003e84\u003c\/td\u003e\n\u003ctd\u003e824\u003c\/td\u003e\n\u003ctd\u003e185.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003ctd\u003e13.5\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003ctd\u003e981\u003c\/td\u003e\n\u003ctd\u003e220.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThese are limit values. For a design you intend to run production on, keep normal working compression well below the maximum; running at the limit shortens fatigue life sharply.\u003c\/p\u003e\n\n\u003ch2\u003eSame size, different load class\u003c\/h2\u003e\n\u003cp\u003eAll three colours share outside diameters and free lengths, so they are dimensionally interchangeable at the same OD. What changes is the force and the usable stroke. At Ø25, for comparison: yellow gives 50 kgf at 50% compression, blue 84 kgf at 40%, red 125 kgf at 32%. More force, less travel, in that order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/yellow-die-springs-65mn-rectangular-wire-tf-swf-extra-light-load-pack-of-2\"\u003eYellow — TF, extra light\u003c\/a\u003e. Less force than blue, but tolerates more compression for the same cycle life. The right answer when you need travel in a shallow pocket. Note its inside diameter is larger at Ø20 and Ø25 (11 and 13.5 mm against blue's 10 and 12.5) because the wire is thinner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue — TL, light\u003c\/strong\u003e (this page). Roughly 1.4 to 1.7 times the yellow load at the same outside diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-die-springs-65mn-rectangular-wire-tm-swm-medium-load-pack-of-2\"\u003eRed — TM, medium\u003c\/a\u003e. About 1.5 times blue again, with less stroke. Ø20 and above only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e65Mn spring steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWire section\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRectangular\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSurface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eElectrophoretic coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eService temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e−30 °C to +150 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColour \/ code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlue, TL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLight (JIS-style system)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSizes available\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ8, Ø10, Ø12, Ø16, Ø20, Ø25 × 20–100 mm free length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2\u003eChoosing a size\u003c\/h2\u003e\n\u003cp\u003eCheck outside diameter against your bore, inside diameter against any pin the spring sits over, free length against your installed height, and confirm the working compression your application needs falls inside the limit for the cycle life you are designing to. If you are replacing an existing spring, matching outside diameter, free length and colour is usually enough.\u003c\/p\u003e\n\n\u003ch2\u003eNeed something else?\u003c\/h2\u003e\n\u003cp\u003eØ6, Ø14, Ø18, Ø22 and Ø27, free lengths to 300 mm, and heavier classes are available. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e with your size and required load, and we will come back within one business day.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. See \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePackaging images are illustrative. Actual protective materials and carton format vary with size, quantity and shipping route.\u003c\/em\u003e\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"8 × 20","offer_id":52257949384924,"sku":"PMC-DIES-001","price":8.9,"currency_code":"USD","in_stock":true},{"title":"8 × 30","offer_id":52257949417692,"sku":"PMC-DIES-002","price":8.9,"currency_code":"USD","in_stock":true},{"title":"8 × 40","offer_id":52257949450460,"sku":"PMC-DIES-003","price":9.9,"currency_code":"USD","in_stock":true},{"title":"8 × 50","offer_id":52257949483228,"sku":"PMC-DIES-004","price":9.9,"currency_code":"USD","in_stock":true},{"title":"8 × 60","offer_id":52257949515996,"sku":"PMC-DIES-005","price":10.9,"currency_code":"USD","in_stock":true},{"title":"10 × 30","offer_id":52257949548764,"sku":"PMC-DIES-006","price":9.9,"currency_code":"USD","in_stock":true},{"title":"10 × 40","offer_id":52257949581532,"sku":"PMC-DIES-007","price":10.9,"currency_code":"USD","in_stock":true},{"title":"10 × 50","offer_id":52257949614300,"sku":"PMC-DIES-008","price":11.9,"currency_code":"USD","in_stock":true},{"title":"10 × 60","offer_id":52257949647068,"sku":"PMC-DIES-009","price":12.9,"currency_code":"USD","in_stock":true},{"title":"10 × 80","offer_id":52257949679836,"sku":"PMC-DIES-010","price":14.9,"currency_code":"USD","in_stock":true},{"title":"8 × 80","offer_id":52300804128988,"sku":"PMC-DIES-011","price":12.9,"currency_code":"USD","in_stock":true},{"title":"8 × 100","offer_id":52300804161756,"sku":"PMC-DIES-012","price":14.9,"currency_code":"USD","in_stock":true},{"title":"10 × 20","offer_id":52300804194524,"sku":"PMC-DIES-013","price":8.9,"currency_code":"USD","in_stock":true},{"title":"10 × 100","offer_id":52300804227292,"sku":"PMC-DIES-014","price":16.9,"currency_code":"USD","in_stock":true},{"title":"12 × 20","offer_id":52300804260060,"sku":"PMC-DIES-015","price":9.9,"currency_code":"USD","in_stock":true},{"title":"12 × 30","offer_id":52300804292828,"sku":"PMC-DIES-016","price":10.9,"currency_code":"USD","in_stock":true},{"title":"12 × 40","offer_id":52300804325596,"sku":"PMC-DIES-017","price":11.9,"currency_code":"USD","in_stock":true},{"title":"12 × 50","offer_id":52300804358364,"sku":"PMC-DIES-018","price":12.9,"currency_code":"USD","in_stock":true},{"title":"12 × 60","offer_id":52300804391132,"sku":"PMC-DIES-019","price":13.9,"currency_code":"USD","in_stock":true},{"title":"12 × 80","offer_id":52300804423900,"sku":"PMC-DIES-020","price":15.9,"currency_code":"USD","in_stock":true},{"title":"12 × 100","offer_id":52300804456668,"sku":"PMC-DIES-021","price":17.9,"currency_code":"USD","in_stock":true},{"title":"16 × 20","offer_id":52300804489436,"sku":"PMC-DIES-022","price":11.9,"currency_code":"USD","in_stock":true},{"title":"16 × 30","offer_id":52300804522204,"sku":"PMC-DIES-023","price":12.9,"currency_code":"USD","in_stock":true},{"title":"16 × 40","offer_id":52300804554972,"sku":"PMC-DIES-024","price":13.9,"currency_code":"USD","in_stock":true},{"title":"16 × 50","offer_id":52300804587740,"sku":"PMC-DIES-025","price":14.9,"currency_code":"USD","in_stock":true},{"title":"16 × 60","offer_id":52300804620508,"sku":"PMC-DIES-026","price":15.9,"currency_code":"USD","in_stock":true},{"title":"16 × 80","offer_id":52300804653276,"sku":"PMC-DIES-027","price":17.9,"currency_code":"USD","in_stock":true},{"title":"16 × 100","offer_id":52300804686044,"sku":"PMC-DIES-028","price":19.9,"currency_code":"USD","in_stock":true},{"title":"20 × 25","offer_id":52300805341404,"sku":"PMC-DIES-029","price":13.9,"currency_code":"USD","in_stock":true},{"title":"20 × 30","offer_id":52300805374172,"sku":"PMC-DIES-030","price":14.9,"currency_code":"USD","in_stock":true},{"title":"20 × 40","offer_id":52300805406940,"sku":"PMC-DIES-031","price":15.9,"currency_code":"USD","in_stock":true},{"title":"20 × 50","offer_id":52300805439708,"sku":"PMC-DIES-032","price":16.9,"currency_code":"USD","in_stock":true},{"title":"20 × 60","offer_id":52300805472476,"sku":"PMC-DIES-033","price":17.9,"currency_code":"USD","in_stock":true},{"title":"20 × 80","offer_id":52300805505244,"sku":"PMC-DIES-034","price":19.9,"currency_code":"USD","in_stock":true},{"title":"20 × 100","offer_id":52300805538012,"sku":"PMC-DIES-035","price":21.9,"currency_code":"USD","in_stock":true},{"title":"25 × 25","offer_id":52300805570780,"sku":"PMC-DIES-036","price":15.9,"currency_code":"USD","in_stock":true},{"title":"25 × 30","offer_id":52300805603548,"sku":"PMC-DIES-037","price":16.9,"currency_code":"USD","in_stock":true},{"title":"25 × 40","offer_id":52300805636316,"sku":"PMC-DIES-038","price":17.9,"currency_code":"USD","in_stock":true},{"title":"25 × 50","offer_id":52300805669084,"sku":"PMC-DIES-039","price":18.9,"currency_code":"USD","in_stock":true},{"title":"25 × 60","offer_id":52300805701852,"sku":"PMC-DIES-040","price":19.9,"currency_code":"USD","in_stock":true},{"title":"25 × 80","offer_id":52300805734620,"sku":"PMC-DIES-041","price":21.9,"currency_code":"USD","in_stock":true},{"title":"25 × 100","offer_id":52300805767388,"sku":"PMC-DIES-042","price":23.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/blue-die-springs-pack-hero-v2.png?v=1788930246"},{"product_id":"standard-mold-locating-rings","title":"Standard Mold Locating Rings — Single Piece","description":"\u003cp\u003e\u003cstrong\u003eReady to order:\u003c\/strong\u003e select the locating-ring size that matches your mold, add it to cart, and enter any fit-critical mounting details in the order note.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — 1 piece per order unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize format:\u003c\/strong\u003e outside diameter – inside diameter × thickness (mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e injection-mold setup, alignment and replacement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed a non-standard bolt pattern or size?\u003c\/strong\u003e \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMetric mold locating rings for injection-mold setup, alignment and replacement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification format:\u003c\/strong\u003e outside diameter – inside diameter × thickness (mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Danyang, Jiangsu, China\u003c\/li\u003e\n\u003cli\u003eBefore ordering, confirm outside diameter, inside diameter, thickness, bolt-hole pattern and counterbore.\u003c\/li\u003e\n\u003cli\u003eMaterial, tolerance and other unlisted technical values must be confirmed when they control fit.\u003c\/li\u003e\n\u003cli\u003eInternational freight is based on packed chargeable weight; see \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a non-standard ring or different mounting pattern, \u003ca href=\"\/pages\/request-a-quote\"\u003erequest a quote\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe packaging gallery image is an original illustrative presentation. Actual protective materials and carton format may vary by product size, quantity and shipping route.\u003c\/em\u003e\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"100–70 × 10","offer_id":52257950007516,"sku":"PMC-LOCA-001","price":13.9,"currency_code":"USD","in_stock":true},{"title":"100–70 × 15","offer_id":52257950040284,"sku":"PMC-LOCA-002","price":12.9,"currency_code":"USD","in_stock":true},{"title":"100–70 × 20","offer_id":52257950073052,"sku":"PMC-LOCA-003","price":17.9,"currency_code":"USD","in_stock":true},{"title":"120–70 × 15","offer_id":52257950105820,"sku":"PMC-LOCA-004","price":18.9,"currency_code":"USD","in_stock":true},{"title":"120–90 × 15","offer_id":52257950138588,"sku":"PMC-LOCA-005","price":18.9,"currency_code":"USD","in_stock":true},{"title":"125–70 × 15","offer_id":52257950171356,"sku":"PMC-LOCA-006","price":19.9,"currency_code":"USD","in_stock":true},{"title":"125–80 × 15","offer_id":52257950204124,"sku":"PMC-LOCA-007","price":21.9,"currency_code":"USD","in_stock":true},{"title":"150–110 × 15","offer_id":52257950236892,"sku":"PMC-LOCA-008","price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/mold-locating-ring-hero.png?v=1788930291"},{"product_id":"grade-12-9-shoulder-screws-pack-of-2","title":"Grade 12.9 Shoulder Screws — Pack of 2","description":"\u003cp\u003e\u003cstrong\u003eReady to order:\u003c\/strong\u003e choose the shoulder diameter × shoulder length you need, add the pack to cart, and verify thread size\/pitch before checkout.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack quantity:\u003c\/strong\u003e 2 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProperty class:\u003c\/strong\u003e 12.9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize format:\u003c\/strong\u003e shoulder diameter × shoulder length (mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom thread or geometry?\u003c\/strong\u003e \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMetric property-class 12.9 shoulder screws \/ stripper bolts for mold assemblies.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage:\u003c\/strong\u003e 2 pieces per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification format:\u003c\/strong\u003e shoulder diameter × shoulder length (mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Danyang, Jiangsu, China\u003c\/li\u003e\n\u003cli\u003eBefore ordering, confirm shoulder diameter, shoulder length, thread size and pitch, head clearance and under-head geometry.\u003c\/li\u003e\n\u003cli\u003eHardness, shoulder tolerance and other unlisted technical values must be confirmed when they control fit or service life.\u003c\/li\u003e\n\u003cli\u003eInternational freight is based on packed chargeable weight; see \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a different thread or custom geometry, \u003ca href=\"\/pages\/request-a-quote\"\u003erequest a quote\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe packaging gallery image is an original illustrative presentation. Actual protective materials and carton format may vary by product size, quantity and shipping route.\u003c\/em\u003e\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"8 × 16","offer_id":52257951088860,"sku":"PMC-SHOU-001","price":7.9,"currency_code":"USD","in_stock":true},{"title":"8 × 20","offer_id":52257951121628,"sku":"PMC-SHOU-002","price":7.9,"currency_code":"USD","in_stock":true},{"title":"8 × 25","offer_id":52257951154396,"sku":"PMC-SHOU-003","price":8.9,"currency_code":"USD","in_stock":true},{"title":"8 × 30","offer_id":52257951187164,"sku":"PMC-SHOU-004","price":8.9,"currency_code":"USD","in_stock":true},{"title":"8 × 40","offer_id":52257951219932,"sku":"PMC-SHOU-005","price":9.9,"currency_code":"USD","in_stock":true},{"title":"8 × 50","offer_id":52257951252700,"sku":"PMC-SHOU-006","price":10.9,"currency_code":"USD","in_stock":true},{"title":"8 × 60","offer_id":52257951285468,"sku":"PMC-SHOU-007","price":11.9,"currency_code":"USD","in_stock":true},{"title":"8 × 70","offer_id":52257951318236,"sku":"PMC-SHOU-008","price":12.9,"currency_code":"USD","in_stock":true},{"title":"8 × 80","offer_id":52257951351004,"sku":"PMC-SHOU-009","price":13.9,"currency_code":"USD","in_stock":true},{"title":"8 × 100","offer_id":52257951383772,"sku":"PMC-SHOU-010","price":15.9,"currency_code":"USD","in_stock":true},{"title":"10 × 20","offer_id":52300807012572,"sku":"PMC-SHOU-011","price":8.9,"currency_code":"USD","in_stock":true},{"title":"10 × 30","offer_id":52300807045340,"sku":"PMC-SHOU-012","price":9.9,"currency_code":"USD","in_stock":true},{"title":"10 × 40","offer_id":52300807078108,"sku":"PMC-SHOU-013","price":10.9,"currency_code":"USD","in_stock":true},{"title":"10 × 50","offer_id":52300807110876,"sku":"PMC-SHOU-014","price":11.9,"currency_code":"USD","in_stock":true},{"title":"10 × 60","offer_id":52300807143644,"sku":"PMC-SHOU-015","price":12.9,"currency_code":"USD","in_stock":true},{"title":"10 × 80","offer_id":52300807176412,"sku":"PMC-SHOU-016","price":14.9,"currency_code":"USD","in_stock":true},{"title":"10 × 100","offer_id":52300807209180,"sku":"PMC-SHOU-017","price":16.9,"currency_code":"USD","in_stock":true},{"title":"12 × 30","offer_id":52300807241948,"sku":"PMC-SHOU-018","price":11.9,"currency_code":"USD","in_stock":true},{"title":"12 × 50","offer_id":52300807274716,"sku":"PMC-SHOU-019","price":13.9,"currency_code":"USD","in_stock":true},{"title":"12 × 80","offer_id":52300807307484,"sku":"PMC-SHOU-020","price":16.9,"currency_code":"USD","in_stock":true},{"title":"16 × 40","offer_id":52300807340252,"sku":"PMC-SHOU-021","price":14.9,"currency_code":"USD","in_stock":true},{"title":"16 × 60","offer_id":52300807373020,"sku":"PMC-SHOU-022","price":16.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/shoulder-screws-pack-hero-v2.png?v=1788930254"},{"product_id":"yellow-die-springs-65mn-rectangular-wire-tf-swf-extra-light-load-pack-of-2","title":"Yellow Die Springs, 65Mn Rectangular Wire — TF\/SWF Extra Light Load — Pack of 2","description":"\u003cp\u003eYellow rectangular-wire die springs in 65Mn spring steel, electrophoretic-coated, for mold and die maintenance or replacement. Sold in packs of 2. Sizes are given as \u003cstrong\u003eoutside diameter × free length\u003c\/strong\u003e in millimetres.\u003c\/p\u003e\n\n\u003ch2\u003eLoad class — read this before ordering\u003c\/h2\u003e\n\u003cp\u003eThese springs follow the \u003cstrong\u003eJIS-style colour system, where yellow is TF — extra light load\u003c\/strong\u003e. It is the softest class in this range.\u003c\/p\u003e\n\u003cp\u003eUnder ISO 10243, yellow means \u003cem\u003eextra heavy\u003c\/em\u003e — the opposite end of the scale. Yellow and green are exact inversions between the two systems, so if your drawing or your existing tool calls out an ISO yellow spring, these are nothing like a drop-in replacement. When the colour and the drawing disagree, work from the load values, not the colour.\u003c\/p\u003e\n\n\u003ch2\u003eMaximum compression depends on the life you need\u003c\/h2\u003e\n\u003cp\u003eCompression limits are quoted against a cycle count, and confusing the two figures is the commonest reason die springs fail early. For yellow TF:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCycle life\u003c\/th\u003e\n\u003cth\u003eMax compression (% of free length)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e300,000 cycles\u003c\/td\u003e\n\u003ctd\u003e50%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e500,000 cycles\u003c\/td\u003e\n\u003ctd\u003e45%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1,000,000 cycles\u003c\/td\u003e\n\u003ctd\u003e40%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolid (reference only)\u003c\/td\u003e\n\u003ctd\u003e53%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDesign a long-run production tool against the 40% figure and treat 50% as a short-life limit rather than as headroom. The solid figure is a reference for clearance calculations, not an operating condition. A spring that comes out of the tool shorter than its original free length has already been over-compressed and will not recover.\u003c\/p\u003e\n\n\u003ch2\u003eMaximum compression load by outside diameter\u003c\/h2\u003e\n\u003cp\u003eYellow TF, at 50% compression — the 300,000-cycle basis. These values depend on outside diameter alone: a 10 × 100 spring has the same limit load as a 10 × 20. Free length changes the available stroke, not the peak force. \u003cstrong\u003eFor the one-million-cycle basis (40%), multiply by 0.8\u003c\/strong\u003e — so a Ø16 spring rated 21 kgf here is 16.8 kgf if you are designing for a million cycles.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOD (mm)\u003c\/th\u003e\n\u003cth\u003eID (mm)\u003c\/th\u003e\n\u003cth\u003eMax load (kgf)\u003c\/th\u003e\n\u003cth\u003eMax load (N)\u003c\/th\u003e\n\u003cth\u003eMax load (lbf)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e59\u003c\/td\u003e\n\u003ctd\u003e13.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e78.5\u003c\/td\u003e\n\u003ctd\u003e17.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e98.1\u003c\/td\u003e\n\u003ctd\u003e22.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e137.3\u003c\/td\u003e\n\u003ctd\u003e30.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003e176.5\u003c\/td\u003e\n\u003ctd\u003e39.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003ctd\u003e206\u003c\/td\u003e\n\u003ctd\u003e46.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003ctd\u003e255\u003c\/td\u003e\n\u003ctd\u003e57.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003ctd\u003e314\u003c\/td\u003e\n\u003ctd\u003e70.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e392\u003c\/td\u003e\n\u003ctd\u003e88.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e13.5\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e490\u003c\/td\u003e\n\u003ctd\u003e110.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003ctd\u003e13.5\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e588\u003c\/td\u003e\n\u003ctd\u003e132.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNote the inside diameters: yellow uses a thinner wire than blue or red at the same outside diameter, so at Ø20 and Ø25 the bore is larger (11 and 13.5 mm) than the blue and red equivalents (10 and 12.5 mm). If you are fitting the spring over a pin, check the ID for the colour you are actually ordering rather than assuming it carries across the range.\u003c\/p\u003e\n\u003cp\u003eThese are limit values. For a working design, keep normal operating compression well below the limit — running at the maximum shortens fatigue life sharply.\u003c\/p\u003e\n\n\u003ch2\u003eSame size, different load class\u003c\/h2\u003e\n\u003cp\u003eAll three colours we stock share outside diameters and free lengths, so they are dimensionally interchangeable at the same OD. What changes is the force and the usable stroke. At Ø25, for comparison: yellow gives 50 kgf at 50% compression, blue 84 kgf at 40%, red 125 kgf at 32%. More force, less travel, in that order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow — TF, extra light\u003c\/strong\u003e (this page). Least force, most travel. The right answer when you need stroke in a shallow pocket.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blue-die-springs-65mn-rectangular-wire-tl-swl-light-load-pack-of-2\"\u003eBlue — TL, light\u003c\/a\u003e. The general-purpose middle.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-die-springs-65mn-rectangular-wire-tm-swm-medium-load-pack-of-2\"\u003eRed — TM, medium\u003c\/a\u003e. Most force, least travel. Ø20 and above only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e65Mn spring steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWire section\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRectangular\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSurface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eElectrophoretic coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eService temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e−30 °C to +150 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColour \/ code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYellow, TF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExtra light (JIS-style system)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSizes available\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ8, Ø10, Ø12, Ø16, Ø20, Ø25 × 20–100 mm free length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2\u003eChoosing a size\u003c\/h2\u003e\n\u003cp\u003eCheck outside diameter against your bore, inside diameter against any pin the spring sits over, free length against your installed height, and confirm the working compression your application needs falls inside the limit for the cycle life you are designing to. If you are replacing an existing spring, matching outside diameter, free length and colour is usually enough — but check that the old spring was specified under the same colour system before you rely on the colour alone.\u003c\/p\u003e\n\n\u003ch2\u003eNeed something else?\u003c\/h2\u003e\n\u003cp\u003eØ6, Ø14, Ø18, Ø22 and Ø27, free lengths to 300 mm, and heavier classes are available. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e with your size, required load and expected cycle life, and we will come back within one business day.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. See \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times. Import duties and taxes are the buyer's responsibility — please read the duties section on that page before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePackaging images are illustrative. Actual protective materials and carton format vary with size, quantity and shipping route.\u003c\/em\u003e\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"8 × 20","offer_id":52426295640284,"sku":"PMC-DIEY-001","price":8.9,"currency_code":"USD","in_stock":true},{"title":"8 × 30","offer_id":52426295673052,"sku":"PMC-DIEY-002","price":8.9,"currency_code":"USD","in_stock":true},{"title":"8 × 40","offer_id":52426295705820,"sku":"PMC-DIEY-003","price":9.9,"currency_code":"USD","in_stock":true},{"title":"8 × 50","offer_id":52426295738588,"sku":"PMC-DIEY-004","price":9.9,"currency_code":"USD","in_stock":true},{"title":"8 × 60","offer_id":52426295771356,"sku":"PMC-DIEY-005","price":10.9,"currency_code":"USD","in_stock":true},{"title":"8 × 80","offer_id":52426295804124,"sku":"PMC-DIEY-006","price":12.9,"currency_code":"USD","in_stock":true},{"title":"8 × 100","offer_id":52426295836892,"sku":"PMC-DIEY-007","price":14.9,"currency_code":"USD","in_stock":true},{"title":"10 × 20","offer_id":52426295869660,"sku":"PMC-DIEY-008","price":8.9,"currency_code":"USD","in_stock":true},{"title":"10 × 30","offer_id":52426295902428,"sku":"PMC-DIEY-009","price":9.9,"currency_code":"USD","in_stock":true},{"title":"10 × 40","offer_id":52426295935196,"sku":"PMC-DIEY-010","price":10.9,"currency_code":"USD","in_stock":true},{"title":"10 × 50","offer_id":52426295967964,"sku":"PMC-DIEY-011","price":11.9,"currency_code":"USD","in_stock":true},{"title":"10 × 60","offer_id":52426296000732,"sku":"PMC-DIEY-012","price":12.9,"currency_code":"USD","in_stock":true},{"title":"10 × 80","offer_id":52426296033500,"sku":"PMC-DIEY-013","price":14.9,"currency_code":"USD","in_stock":true},{"title":"10 × 100","offer_id":52426296066268,"sku":"PMC-DIEY-014","price":16.9,"currency_code":"USD","in_stock":true},{"title":"12 × 20","offer_id":52426296099036,"sku":"PMC-DIEY-015","price":9.9,"currency_code":"USD","in_stock":true},{"title":"12 × 30","offer_id":52426296131804,"sku":"PMC-DIEY-016","price":10.9,"currency_code":"USD","in_stock":true},{"title":"12 × 40","offer_id":52426296164572,"sku":"PMC-DIEY-017","price":11.9,"currency_code":"USD","in_stock":true},{"title":"12 × 50","offer_id":52426296197340,"sku":"PMC-DIEY-018","price":12.9,"currency_code":"USD","in_stock":true},{"title":"12 × 60","offer_id":52426296230108,"sku":"PMC-DIEY-019","price":13.9,"currency_code":"USD","in_stock":true},{"title":"12 × 80","offer_id":52426296262876,"sku":"PMC-DIEY-020","price":15.9,"currency_code":"USD","in_stock":true},{"title":"12 × 100","offer_id":52426296295644,"sku":"PMC-DIEY-021","price":17.9,"currency_code":"USD","in_stock":true},{"title":"16 × 20","offer_id":52426296328412,"sku":"PMC-DIEY-022","price":11.9,"currency_code":"USD","in_stock":true},{"title":"16 × 30","offer_id":52426296361180,"sku":"PMC-DIEY-023","price":12.9,"currency_code":"USD","in_stock":true},{"title":"16 × 40","offer_id":52426296393948,"sku":"PMC-DIEY-024","price":13.9,"currency_code":"USD","in_stock":true},{"title":"16 × 50","offer_id":52426296426716,"sku":"PMC-DIEY-025","price":14.9,"currency_code":"USD","in_stock":true},{"title":"16 × 60","offer_id":52426296459484,"sku":"PMC-DIEY-026","price":15.9,"currency_code":"USD","in_stock":true},{"title":"16 × 80","offer_id":52426296492252,"sku":"PMC-DIEY-027","price":17.9,"currency_code":"USD","in_stock":true},{"title":"16 × 100","offer_id":52426296525020,"sku":"PMC-DIEY-028","price":19.9,"currency_code":"USD","in_stock":true},{"title":"20 × 25","offer_id":52426296557788,"sku":"PMC-DIEY-029","price":13.9,"currency_code":"USD","in_stock":true},{"title":"20 × 30","offer_id":52426296590556,"sku":"PMC-DIEY-030","price":14.9,"currency_code":"USD","in_stock":true},{"title":"20 × 40","offer_id":52426296623324,"sku":"PMC-DIEY-031","price":15.9,"currency_code":"USD","in_stock":true},{"title":"20 × 50","offer_id":52426296656092,"sku":"PMC-DIEY-032","price":16.9,"currency_code":"USD","in_stock":true},{"title":"20 × 60","offer_id":52426296688860,"sku":"PMC-DIEY-033","price":17.9,"currency_code":"USD","in_stock":true},{"title":"20 × 80","offer_id":52426296721628,"sku":"PMC-DIEY-034","price":19.9,"currency_code":"USD","in_stock":true},{"title":"20 × 100","offer_id":52426296754396,"sku":"PMC-DIEY-035","price":21.9,"currency_code":"USD","in_stock":true},{"title":"25 × 25","offer_id":52426296787164,"sku":"PMC-DIEY-036","price":15.9,"currency_code":"USD","in_stock":true},{"title":"25 × 30","offer_id":52426296819932,"sku":"PMC-DIEY-037","price":16.9,"currency_code":"USD","in_stock":true},{"title":"25 × 40","offer_id":52426296852700,"sku":"PMC-DIEY-038","price":17.9,"currency_code":"USD","in_stock":true},{"title":"25 × 50","offer_id":52426296885468,"sku":"PMC-DIEY-039","price":18.9,"currency_code":"USD","in_stock":true},{"title":"25 × 60","offer_id":52426296918236,"sku":"PMC-DIEY-040","price":19.9,"currency_code":"USD","in_stock":true},{"title":"25 × 80","offer_id":52426296951004,"sku":"PMC-DIEY-041","price":21.9,"currency_code":"USD","in_stock":true},{"title":"25 × 100","offer_id":52426296983772,"sku":"PMC-DIEY-042","price":23.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/yellow-die-springs-pack-hero.png?v=1788930126"},{"product_id":"red-die-springs-65mn-rectangular-wire-tm-swm-medium-load-pack-of-2","title":"Red Die Springs, 65Mn Rectangular Wire — TM\/SWM Medium Load — Pack of 2","description":"\u003cp\u003eRed rectangular-wire die springs in 65Mn spring steel, electrophoretic-coated, for mold and die maintenance or replacement. Sold in packs of 2. Sizes are given as \u003cstrong\u003eoutside diameter × free length\u003c\/strong\u003e in millimetres.\u003c\/p\u003e\n\n\u003ch2\u003eLoad class — read this before ordering\u003c\/h2\u003e\n\u003cp\u003eThese springs follow the \u003cstrong\u003eJIS-style colour system, where red is TM — medium load\u003c\/strong\u003e. It sits one class above blue (light) and two above yellow (extra light) in the same dimensional range.\u003c\/p\u003e\n\u003cp\u003eUnder ISO 10243, red means \u003cem\u003eheavy\u003c\/em\u003e — one class higher again. Red is the one colour that shifts by a single step rather than inverting, which makes it easier to get wrong than yellow or green: an ISO red spring and a JIS red spring drop into the same pocket and give you noticeably different force. If your drawing calls out ISO 10243, tell us the load you need and we will confirm the right part rather than matching on colour.\u003c\/p\u003e\n\n\u003ch2\u003eMaximum compression depends on the life you need\u003c\/h2\u003e\n\u003cp\u003eCompression limits are quoted against a cycle count, and confusing the two figures is the commonest reason die springs fail early. For red TM:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCycle life\u003c\/th\u003e\n\u003cth\u003eMax compression (% of free length)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e300,000 cycles\u003c\/td\u003e\n\u003ctd\u003e32%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e500,000 cycles\u003c\/td\u003e\n\u003ctd\u003e28.8%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1,000,000 cycles\u003c\/td\u003e\n\u003ctd\u003e25.6%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolid (reference only)\u003c\/td\u003e\n\u003ctd\u003e35%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDesign a long-run production tool against the 25.6% figure and treat 32% as a short-life limit rather than as headroom. The solid figure is a reference for clearance calculations, not an operating condition. A spring that comes out of the tool shorter than its original free length has already been over-compressed and will not recover.\u003c\/p\u003e\n\n\u003ch2\u003eMaximum compression load by outside diameter\u003c\/h2\u003e\n\u003cp\u003eRed TM, at 32% compression — the 300,000-cycle basis. These values depend on outside diameter alone: a 25 × 100 spring has the same limit load as a 25 × 30. Free length changes the available stroke, not the peak force. \u003cstrong\u003eFor the one-million-cycle basis (25.6%), multiply by 0.8.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOD (mm)\u003c\/th\u003e\n\u003cth\u003eID (mm)\u003c\/th\u003e\n\u003cth\u003eMax load (kgf)\u003c\/th\u003e\n\u003cth\u003eMax load (N)\u003c\/th\u003e\n\u003cth\u003eMax load (lbf)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003ctd\u003e785\u003c\/td\u003e\n\u003ctd\u003e176\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e12.5\u003c\/td\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003ctd\u003e1226\u003c\/td\u003e\n\u003ctd\u003e276\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003ctd\u003e1765\u003c\/td\u003e\n\u003ctd\u003e397\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e17.5\u003c\/td\u003e\n\u003ctd\u003e244.7\u003c\/td\u003e\n\u003ctd\u003e2400\u003c\/td\u003e\n\u003ctd\u003e540\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e320.2\u003c\/td\u003e\n\u003ctd\u003e3140\u003c\/td\u003e\n\u003ctd\u003e706\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThese are limit values. For a working design, keep normal operating compression well below the limit — running at the maximum shortens fatigue life sharply.\u003c\/p\u003e\n\n\u003ch2\u003eSame size, different load class\u003c\/h2\u003e\n\u003cp\u003eAll three colours we stock share outside diameters and free lengths, so they are dimensionally interchangeable at the same OD. What changes is the force and the usable stroke. At Ø25, for comparison: yellow gives 50 kgf at 50% compression, blue 84 kgf at 40%, red 125 kgf at 32%. More force, less travel, in that order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/yellow-die-springs-65mn-rectangular-wire-tf-swf-extra-light-load-pack-of-2\"\u003eYellow — TF, extra light\u003c\/a\u003e. Least force, most travel.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blue-die-springs-65mn-rectangular-wire-tl-swl-light-load-pack-of-2\"\u003eBlue — TL, light\u003c\/a\u003e. The general-purpose middle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed — TM, medium\u003c\/strong\u003e (this page). Ø20 and above only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhen red is the right choice\u003c\/h2\u003e\n\u003cp\u003eRed is the class to reach for when you have run out of pocket. If a blue spring of the outside diameter your plate will take cannot generate the force you need, you have two options: go to a bigger outside diameter, or go up a load class at the same diameter. Where the bore is fixed — a stripper plate, an ejector return, a slide retention pocket you cannot enlarge — going up a class is the only route.\u003c\/p\u003e\n\u003cp\u003eThe trade is stroke. Red gives you 1.5 times the blue load at the same OD but only 32% compression against blue's 40%, so check your working compression against the limit before you commit rather than after. If you need both force and travel in a fixed pocket, the answer is usually two shorter springs in series or a redesign of the pocket, not a harder spring run near its limit.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e65Mn spring steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWire section\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRectangular\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSurface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eElectrophoretic coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eService temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e−30 °C to +150 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColour \/ code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRed, TM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMedium (JIS-style system)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSizes available\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ20, Ø25, Ø30, Ø35, Ø40 × 25–100 mm free length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRed is not made below Ø20 in this range. If you need medium load in a smaller bore, ask — we will tell you honestly whether it exists or whether you are better served by a blue spring at the next diameter up.\u003c\/p\u003e\n\n\u003ch2\u003eNeed something else?\u003c\/h2\u003e\n\u003cp\u003eØ50 and Ø60 red, free lengths beyond 100 mm, and green TH heavy-load springs are all available. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e with your size, required load and expected cycle life and we will come back within one business day.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. See \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times. Import duties and taxes are the buyer's responsibility — please read the duties section on that page before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eDiagram is dimensional and applies to all colours in this range.\u003c\/em\u003e\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"20 × 25","offer_id":52426297508060,"sku":"PMC-DIER-001","price":14.9,"currency_code":"USD","in_stock":true},{"title":"20 × 30","offer_id":52426297540828,"sku":"PMC-DIER-002","price":15.9,"currency_code":"USD","in_stock":true},{"title":"20 × 40","offer_id":52426297573596,"sku":"PMC-DIER-003","price":16.9,"currency_code":"USD","in_stock":true},{"title":"20 × 50","offer_id":52426297606364,"sku":"PMC-DIER-004","price":17.9,"currency_code":"USD","in_stock":true},{"title":"20 × 60","offer_id":52426297639132,"sku":"PMC-DIER-005","price":18.9,"currency_code":"USD","in_stock":true},{"title":"20 × 80","offer_id":52426297671900,"sku":"PMC-DIER-006","price":20.9,"currency_code":"USD","in_stock":true},{"title":"20 × 100","offer_id":52426297704668,"sku":"PMC-DIER-007","price":22.9,"currency_code":"USD","in_stock":true},{"title":"25 × 25","offer_id":52426297737436,"sku":"PMC-DIER-008","price":16.9,"currency_code":"USD","in_stock":true},{"title":"25 × 30","offer_id":52426297770204,"sku":"PMC-DIER-009","price":17.9,"currency_code":"USD","in_stock":true},{"title":"25 × 40","offer_id":52426297802972,"sku":"PMC-DIER-010","price":18.9,"currency_code":"USD","in_stock":true},{"title":"25 × 50","offer_id":52426297835740,"sku":"PMC-DIER-011","price":19.9,"currency_code":"USD","in_stock":true},{"title":"25 × 60","offer_id":52426297868508,"sku":"PMC-DIER-012","price":20.9,"currency_code":"USD","in_stock":true},{"title":"25 × 80","offer_id":52426297901276,"sku":"PMC-DIER-013","price":22.9,"currency_code":"USD","in_stock":true},{"title":"25 × 100","offer_id":52426297934044,"sku":"PMC-DIER-014","price":24.9,"currency_code":"USD","in_stock":true},{"title":"30 × 30","offer_id":52426297966812,"sku":"PMC-DIER-015","price":18.9,"currency_code":"USD","in_stock":true},{"title":"30 × 40","offer_id":52426297999580,"sku":"PMC-DIER-016","price":19.9,"currency_code":"USD","in_stock":true},{"title":"30 × 50","offer_id":52426298032348,"sku":"PMC-DIER-017","price":20.9,"currency_code":"USD","in_stock":true},{"title":"30 × 60","offer_id":52426298065116,"sku":"PMC-DIER-018","price":21.9,"currency_code":"USD","in_stock":true},{"title":"30 × 80","offer_id":52426298097884,"sku":"PMC-DIER-019","price":23.9,"currency_code":"USD","in_stock":true},{"title":"30 × 100","offer_id":52426298130652,"sku":"PMC-DIER-020","price":25.9,"currency_code":"USD","in_stock":true},{"title":"35 × 35","offer_id":52426298163420,"sku":"PMC-DIER-021","price":20.9,"currency_code":"USD","in_stock":true},{"title":"35 × 40","offer_id":52426298196188,"sku":"PMC-DIER-022","price":21.9,"currency_code":"USD","in_stock":true},{"title":"35 × 50","offer_id":52426298228956,"sku":"PMC-DIER-023","price":22.9,"currency_code":"USD","in_stock":true},{"title":"35 × 60","offer_id":52426298261724,"sku":"PMC-DIER-024","price":23.9,"currency_code":"USD","in_stock":true},{"title":"35 × 80","offer_id":52426298294492,"sku":"PMC-DIER-025","price":25.9,"currency_code":"USD","in_stock":true},{"title":"35 × 100","offer_id":52426298327260,"sku":"PMC-DIER-026","price":27.9,"currency_code":"USD","in_stock":true},{"title":"40 × 40","offer_id":52426298360028,"sku":"PMC-DIER-027","price":22.9,"currency_code":"USD","in_stock":true},{"title":"40 × 50","offer_id":52426298392796,"sku":"PMC-DIER-028","price":23.9,"currency_code":"USD","in_stock":true},{"title":"40 × 60","offer_id":52426298425564,"sku":"PMC-DIER-029","price":24.9,"currency_code":"USD","in_stock":true},{"title":"40 × 80","offer_id":52426298458332,"sku":"PMC-DIER-030","price":25.9,"currency_code":"USD","in_stock":true},{"title":"40 × 100","offer_id":52426298491100,"sku":"PMC-DIER-031","price":27.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/red-die-springs-pack-of-2-main.png?v=1788927181"},{"product_id":"skd61-nitrided-stepped-ejector-pins-pack-of-5","title":"SKD61 Nitrided Stepped Ejector Pins — Pack of 5","description":"\u003cp\u003eSKD61 vacuum-hardened, nitrided stepped ejector pins for injection-mold maintenance and replacement. Sold in packs of 5. Stepped pins let you eject from a small feature without running a fragile thin pin the whole length of the plate — the tip does the work, the larger shank carries the load and the buckling.\u003c\/p\u003e\n\n\u003ch2\u003eHow the size is written\u003c\/h2\u003e\n\u003cp\u003eWe use the notation \u003cstrong\u003eP × D × L – N\u003c\/strong\u003e, the same convention used on our custom stepped-pin quotations:\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTip diameter — the working end that contacts the part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRetention \/ shoulder diameter — the larger section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eN\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRetention length, from the head-side reference to the step\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eL − N\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEffective length of the small-diameter tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSo \u003ccode\u003eP2 × D3 × L200 – N70\u003c\/code\u003e is a 2 mm tip on a 3 mm shank, 200 mm overall, with 70 mm of retention length — leaving 130 mm of Ø2 tip. All dimensions in millimetres.\u003c\/p\u003e\n\u003cp\u003eThe same tip diameter appears against more than one retention diameter in this range, so always work from the full P × D pair rather than the tip alone. A Ø2 tip on a Ø3 shank and a Ø2 tip on a Ø4 shank are different parts and need different plate holes.\u003c\/p\u003e\n\n\u003ch2\u003eGetting the step in the right place\u003c\/h2\u003e\n\u003cp\u003eN is the dimension people most often get wrong when ordering a replacement, because it is the one you cannot measure once the pin is in the mold. The step has to sit inside the plate, not inside the core — if the shoulder lands in the core bore, the pin will not seat and you will either crush the step or open the hole. If the step sits too far back, the thin tip runs unsupported over most of its length and you are back to the buckling problem the stepped pin was supposed to solve.\u003c\/p\u003e\n\u003cp\u003eThe practical rule when replacing: pull the old pin, measure from the head face to the change in diameter, and give us that number as N. If the old pin is broken at the step — which is where they usually break — measure the plate stack instead and tell us the thicknesses; we will work N back from that.\u003c\/p\u003e\n\n\u003ch2\u003eWhy thin tips are not cheap\u003c\/h2\u003e\n\u003cp\u003eA Ø0.8 tip does not cost less than a Ø3 pin because it uses less steel. Long thin ground sections need slower feeds, more passes and more scrap, so cost rises as the tip gets finer and the length gets longer — the opposite of what mass would suggest. That is reflected in the pricing here: length drives price far more than diameter does.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSKD61 (JIS G4404), equivalent to H13 \/ 1.2344\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTreatment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVacuum hardened and nitrided\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCase hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e700–900 HV on the nitrided surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCore hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e35–42 HRC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTip diameters (P)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ0.8, 1.0, 1.2, 1.5, 1.8, 2.0, 2.5, 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRetention diameters (D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ3, Ø4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall lengths (L)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e150, 200, 250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRetention lengths (N)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50, 70, 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2\u003eA note on how nitride hardness is quoted\u003c\/h2\u003e\n\u003cp\u003eA nitrided case is quoted in Vickers (HV), not Rockwell C. The case is only a few hundredths of a millimetre deep, so a Rockwell C indenter pushes through it into the softer core and reads low — any nitrided pin sold with a single \"60 HRC surface\" figure is quoting a conversion, not a measurement.\u003c\/p\u003e\n\u003cp\u003eCore hardness is a genuine HRC figure and is the one that matters for whether a stepped pin bends or snaps at the shoulder. \u003cstrong\u003eWe confirm the measured case and core values for your batch in writing before shipping\u003c\/strong\u003e, and a hardness report can be supplied with the order. If your incoming inspection tests to a specific standard, tell us which and we will make sure the certificate matches it.\u003c\/p\u003e\n\u003cp\u003eIf you need a fully hardened stepped pin instead — SKD61 vacuum hardened through-section, roughly 48–52 HRC, for abrasive or glass-filled resins — ask and we will quote it. It wears better and tolerates shock less well, which at the step is a real trade rather than an upgrade.\u003c\/p\u003e\n\n\u003ch2\u003eCutting to length\u003c\/h2\u003e\n\u003cp\u003eThese pins are supplied at nominal length and are normally cut and fitted at the head end. Note that the nitrided case is hard and shallow — cutting exposes unnitrided core material at the cut face, which is fine at the head but is not something you want at the working tip. If you need a finished length rather than a blank, tell us and we will supply it cut and faced.\u003c\/p\u003e\n\n\u003ch2\u003eNeed a size that is not listed?\u003c\/h2\u003e\n\u003cp\u003eOther P \/ D combinations, head diameters and thicknesses, double-step and three-section pins, and lengths outside this range are all made to order. \u003ca href=\"\/products\/skd61-stepped-ejector-pin\"\u003eRequest a quote on the custom stepped pin page\u003c\/a\u003e with your P × D × L – N, or send a photo of the broken pin next to a caliper — that is often enough to start.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. Long thin pins are packed in rigid tubes; see \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times. Import duties and taxes are the buyer's responsibility — please read the duties section on that page before ordering.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"P0.8 × D3 × L150 – N50","offer_id":52426300063964,"sku":"PMC-STEP-001","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P0.8 × D3 × L150 – N70","offer_id":52426300096732,"sku":"PMC-STEP-002","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P0.8 × D3 × L200 – N50","offer_id":52426300129500,"sku":"PMC-STEP-003","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P0.8 × D3 × L200 – N70","offer_id":52426300162268,"sku":"PMC-STEP-004","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P1 × D3 × L150 – N50","offer_id":52426300195036,"sku":"PMC-STEP-005","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P1 × D3 × L150 – N70","offer_id":52426300227804,"sku":"PMC-STEP-006","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P1 × D3 × L200 – N50","offer_id":52426300260572,"sku":"PMC-STEP-007","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P1 × D3 × L200 – N70","offer_id":52426300293340,"sku":"PMC-STEP-008","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P1.2 × D3 × L150 – N50","offer_id":52426300326108,"sku":"PMC-STEP-009","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P1.2 × D3 × L150 – N70","offer_id":52426300358876,"sku":"PMC-STEP-010","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P1.2 × D3 × L150 – N75","offer_id":52426300391644,"sku":"PMC-STEP-011","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P1.2 × D3 × L200 – N50","offer_id":52426300424412,"sku":"PMC-STEP-012","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P1.2 × D3 × L200 – N70","offer_id":52426300457180,"sku":"PMC-STEP-013","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P1.5 × D3 × L150 – N50","offer_id":52426300489948,"sku":"PMC-STEP-014","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P1.5 × D3 × L150 – N70","offer_id":52426300522716,"sku":"PMC-STEP-015","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P1.5 × D3 × L200 – N50","offer_id":52426300555484,"sku":"PMC-STEP-016","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P1.5 × D3 × L200 – N70","offer_id":52426300588252,"sku":"PMC-STEP-017","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P1.8 × D3 × L150 – N50","offer_id":52426300621020,"sku":"PMC-STEP-018","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P1.8 × D3 × L150 – N70","offer_id":52426300653788,"sku":"PMC-STEP-019","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P1.8 × D3 × L200 – N50","offer_id":52426300686556,"sku":"PMC-STEP-020","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P1.8 × D3 × L200 – N70","offer_id":52426300719324,"sku":"PMC-STEP-021","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P2 × D3 × L150 – N50","offer_id":52426300752092,"sku":"PMC-STEP-022","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P2 × D3 × L150 – N70","offer_id":52426300784860,"sku":"PMC-STEP-023","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P2 × D3 × L200 – N50","offer_id":52426300817628,"sku":"PMC-STEP-024","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P2 × D3 × L200 – N70","offer_id":52426300850396,"sku":"PMC-STEP-025","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P2 × D3 × L250 – N70","offer_id":52426300883164,"sku":"PMC-STEP-026","price":16.9,"currency_code":"USD","in_stock":true},{"title":"P2.5 × D3 × L150 – N50","offer_id":52426300915932,"sku":"PMC-STEP-027","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P2.5 × D3 × L150 – N70","offer_id":52426300948700,"sku":"PMC-STEP-028","price":10.9,"currency_code":"USD","in_stock":true},{"title":"P2.5 × D3 × L200 – N50","offer_id":52426300981468,"sku":"PMC-STEP-029","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P2.5 × D3 × L200 – N70","offer_id":52426301014236,"sku":"PMC-STEP-030","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P2 × D4 × L150 – N50","offer_id":52426301047004,"sku":"PMC-STEP-031","price":16.9,"currency_code":"USD","in_stock":true},{"title":"P2 × D4 × L150 – N70","offer_id":52426301079772,"sku":"PMC-STEP-032","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P2 × D4 × L200 – N50","offer_id":52426301112540,"sku":"PMC-STEP-033","price":17.9,"currency_code":"USD","in_stock":true},{"title":"P2 × D4 × L200 – N70","offer_id":52426301145308,"sku":"PMC-STEP-034","price":17.9,"currency_code":"USD","in_stock":true},{"title":"P2.5 × D4 × L150 – N50","offer_id":52426301178076,"sku":"PMC-STEP-035","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P2.5 × D4 × L200 – N50","offer_id":52426301210844,"sku":"PMC-STEP-036","price":17.9,"currency_code":"USD","in_stock":true},{"title":"P2.5 × D4 × L200 – N70","offer_id":52426301243612,"sku":"PMC-STEP-037","price":17.9,"currency_code":"USD","in_stock":true},{"title":"P2.5 × D4 × L250 – N70","offer_id":52426301276380,"sku":"PMC-STEP-038","price":17.9,"currency_code":"USD","in_stock":true},{"title":"P3 × D4 × L150 – N50","offer_id":52426301309148,"sku":"PMC-STEP-039","price":14.9,"currency_code":"USD","in_stock":true},{"title":"P3 × D4 × L200 – N50","offer_id":52426301341916,"sku":"PMC-STEP-040","price":17.9,"currency_code":"USD","in_stock":true},{"title":"P3 × D4 × L200 – N70","offer_id":52426301374684,"sku":"PMC-STEP-041","price":17.9,"currency_code":"USD","in_stock":true},{"title":"P3 × D4 × L250 – N70","offer_id":52426301407452,"sku":"PMC-STEP-042","price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/skd61-stepped-ejector-pins-hero-v2.png?v=1788930273"},{"product_id":"hardened-runner-puller-pins-z-type-pack-of-10","title":"Hardened Runner Puller Pins, Z-Type — Pack of 10","description":"\u003cp\u003eHardened runner puller pins (sprue pullers) for injection molds, sold in packs of 10. Sizes are given as \u003cstrong\u003ediameter × overall length\u003c\/strong\u003e in millimetres.\u003c\/p\u003e\n\n\u003ch2\u003eWhat the puller actually does\u003c\/h2\u003e\n\u003cp\u003eThe runner puller holds the cold runner and sprue on the moving half as the mold opens, so the sprue comes out of the fixed-half bushing rather than staying in it. It then releases the runner on the ejector stroke. That is two jobs with opposite requirements — grip on opening, release on ejection — which is why a puller that is slightly wrong causes trouble that looks like it is coming from somewhere else.\u003c\/p\u003e\n\u003cp\u003eToo little grip and the sprue stays in the bushing: the mold opens, the runner hangs on the fixed half, and the next shot short-fills or the operator is picking sprues out with pliers. Too much grip and the runner will not let go of the puller on ejection, so it rides back into the closing mold. Most of the \"the robot keeps missing the runner\" complaints on a new tool are a puller geometry problem, not a robot problem.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the undercut form\u003c\/h2\u003e\n\u003cp\u003eThese are supplied with a Z-type (angled undercut) head, the general-purpose form for cold-runner molds with a standard three-plate or two-plate layout. If your runner is deep, tapered, or the material is stiff and glass-filled, the alternatives worth knowing about are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall \/ spherical head\u003c\/strong\u003e — releases more readily, less positive grip. Suits soft and slippery materials that let go too easily from a Z.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse taper (conical)\u003c\/strong\u003e — pulls straight, releases straight, wears more evenly than a Z on abrasive filled resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMushroom head\u003c\/strong\u003e — strongest grip, hardest release. For deep runners on tools where the sprue is heavy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are replacing a puller that was working, match the form you took out rather than what looks similar in a catalogue. If you are fixing a mold that never worked properly, tell us the resin and the runner cross-section and we will suggest a form.\u003c\/p\u003e\n\n\u003ch2\u003eFitting notes\u003c\/h2\u003e\n\u003cp\u003eThe pin has to be flush with, or very slightly below, the runner floor. Proud of the floor and it becomes a flow obstruction, packs differently on either side and can leave a witness on the part. Well below the floor and the undercut is not fully engaged in the plastic, so grip becomes intermittent — the puller works on nine shots and fails on the tenth, which is the hardest kind of fault to diagnose.\u003c\/p\u003e\n\u003cp\u003eAlso check that the puller bore is vented. A blind puller pocket traps gas at the end of the runner, and the resulting burn shows at exactly the point the tool builder least expects.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHead form\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eZ-type angled undercut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCondition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHardened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiameters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ4, Ø5, Ø6, Ø8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30, 40, 50, 60, 70 mm (Ø8 from 40 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eIntermediate lengths in 2 mm steps exist across this whole range and are not all listed here. If you need one between the sizes shown, ask — it is a stocked size, not a special.\u003c\/p\u003e\n\n\u003ch2\u003eA note on price and diameter\u003c\/h2\u003e\n\u003cp\u003eYou may notice Ø4 is not the cheapest option. Small-diameter ground pins carry more grinding time per piece than the next size up, so cost does not simply follow steel mass. We price from actual supplier cost rather than smoothing it into a tidy ladder, so the numbers occasionally look counter-intuitive. They are the real figures.\u003c\/p\u003e\n\n\u003ch2\u003eNeed something else?\u003c\/h2\u003e\n\u003cp\u003eOther head forms, non-standard undercut angles, longer pins and material-specific hardness are all made to order. \u003ca href=\"\/products\/hardened-runner-puller-pin\"\u003eRequest a quote on the custom runner puller page\u003c\/a\u003e with your geometry, or send a sketch of the runner section and we will propose the form.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"\/pages\/request-a-quote?product=hardened-runner-puller-pins-z-type-pack-of-10\u0026amp;title=Runner%20Puller%20Pins#rfq-form\"\u003eUpload a sketch or dimensions and request a written quotation →\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. See \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times. Import duties and taxes are the buyer's responsibility — please read the duties section on that page before ordering.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"4 × 30","offer_id":52426301538524,"sku":"PMC-PULL-001","price":13.9,"currency_code":"USD","in_stock":true},{"title":"4 × 40","offer_id":52426301571292,"sku":"PMC-PULL-002","price":13.9,"currency_code":"USD","in_stock":true},{"title":"4 × 50","offer_id":52426301604060,"sku":"PMC-PULL-003","price":13.9,"currency_code":"USD","in_stock":true},{"title":"4 × 60","offer_id":52426301636828,"sku":"PMC-PULL-004","price":13.9,"currency_code":"USD","in_stock":true},{"title":"4 × 70","offer_id":52426301669596,"sku":"PMC-PULL-005","price":13.9,"currency_code":"USD","in_stock":true},{"title":"5 × 30","offer_id":52426301702364,"sku":"PMC-PULL-006","price":11.9,"currency_code":"USD","in_stock":true},{"title":"5 × 40","offer_id":52426301735132,"sku":"PMC-PULL-007","price":12.9,"currency_code":"USD","in_stock":true},{"title":"5 × 50","offer_id":52426301767900,"sku":"PMC-PULL-008","price":13.9,"currency_code":"USD","in_stock":true},{"title":"5 × 60","offer_id":52426301800668,"sku":"PMC-PULL-009","price":14.9,"currency_code":"USD","in_stock":true},{"title":"5 × 70","offer_id":52426301833436,"sku":"PMC-PULL-010","price":14.9,"currency_code":"USD","in_stock":true},{"title":"6 × 30","offer_id":52426301866204,"sku":"PMC-PULL-011","price":11.9,"currency_code":"USD","in_stock":true},{"title":"6 × 40","offer_id":52426301898972,"sku":"PMC-PULL-012","price":12.9,"currency_code":"USD","in_stock":true},{"title":"6 × 50","offer_id":52426301931740,"sku":"PMC-PULL-013","price":13.9,"currency_code":"USD","in_stock":true},{"title":"6 × 60","offer_id":52426301964508,"sku":"PMC-PULL-014","price":13.9,"currency_code":"USD","in_stock":true},{"title":"6 × 70","offer_id":52426301997276,"sku":"PMC-PULL-015","price":14.9,"currency_code":"USD","in_stock":true},{"title":"8 × 40","offer_id":52426302030044,"sku":"PMC-PULL-016","price":12.9,"currency_code":"USD","in_stock":true},{"title":"8 × 50","offer_id":52426302062812,"sku":"PMC-PULL-017","price":12.9,"currency_code":"USD","in_stock":true},{"title":"8 × 60","offer_id":52426302095580,"sku":"PMC-PULL-018","price":14.9,"currency_code":"USD","in_stock":true},{"title":"8 × 70","offer_id":52426302128348,"sku":"PMC-PULL-019","price":14.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/z-type-runner-puller-pins-pack-hero.png?v=1788929617"},{"product_id":"c-type-sprue-bushing-for-injection-molds","title":"C-Type Sprue Bushing for Injection Molds","description":"\u003cp\u003eC-type sprue bushings for injection molds, supplied singly. Sizes are given as \u003cstrong\u003ebody diameter × overall length\u003c\/strong\u003e, with the flange size in brackets. All dimensions in millimetres.\u003c\/p\u003e\n\n\u003ch2\u003eTwo things you must tell us before we ship\u003c\/h2\u003e\n\u003cp\u003eThe dimensions in the size selector — body diameter, overall length, flange diameter and flange thickness — are what has to fit your mold plate. Two more dimensions have to fit your \u003cem\u003emachine\u003c\/em\u003e, and they are not part of the size code:\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSR — spherical seat radius\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMust match your machine's nozzle radius. Common values are SR11, SR16, SR18 and SR20. A mismatch here means the nozzle will not seat and you will get drool, flash at the interface, or a cold slug on every shot.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eP — gate entry hole diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTypically 3.5 or 5 mm. It should be slightly larger than the machine nozzle bore so the sprue releases cleanly.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eAdd these to your order note at checkout\u003c\/strong\u003e, or email them to \u003ca href=\"mailto:sales@privleymold.com\"\u003esales@privleymold.com\u003c\/a\u003e with your order number. If you are unsure, tell us your machine make and tonnage and we will look up the standard nozzle radius for it. We confirm both values back to you in writing before anything is cut.\u003c\/p\u003e\n\u003cp\u003eIf you order without specifying, we will contact you rather than guess — but that adds a day, so it is worth putting in the note.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing body diameter and length\u003c\/h2\u003e\n\u003cp\u003eOverall length has to bridge the fixed clamping plate and the cavity plate, ending flush with the cavity face. Measure the plate stack rather than the old bushing if the old one was already the wrong length — a bushing standing proud leaves a raised sprue witness, and one sitting low creates a pocket where the sprue snaps off and stays behind.\u003c\/p\u003e\n\u003cp\u003eBody diameter sets the sprue taper and therefore how readily the sprue pulls. Larger bodies suit thicker sections and longer runs; going larger than you need means a heavier sprue, longer cooling and more regrind. The Ø12 and Ø16 sizes cover most general work.\u003c\/p\u003e\n\n\u003ch2\u003eFlange size\u003c\/h2\u003e\n\u003cp\u003eThe flange seats in the counterbore in the fixed plate and takes the injection load. Ø35, Ø40 and Ø50 diameters are available in 10 and 15 mm thicknesses, but not every combination exists at every body size and length — the size selector shows only what is actually available. If your counterbore needs something else, ask.\u003c\/p\u003e\n\u003cp\u003eLonger bushings above 150 mm are supplied with the Ø50 × 15 flange only.\u003c\/p\u003e\n\n\u003ch2\u003ePairs with the locating ring\u003c\/h2\u003e\n\u003cp\u003eThe bushing and the locating ring work together: the ring centres the sprue on the platen, the bushing takes the nozzle. If you are replacing one on an older tool, check the other at the same time — a worn ring lets the nozzle sit off-centre and the bushing seat wears fast as a result. \u003ca href=\"\/collections\/runner-sprue-components\"\u003eSee runner and sprue components\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eC-type, flanged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody diameters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ10, Ø12, Ø16, Ø20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50–200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlange\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ35, Ø40, Ø50 × 10 or 15 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSR \/ gate hole\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSpecified by you on order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupplied\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2\u003eNeed something else?\u003c\/h2\u003e\n\u003cp\u003eA-type and B-type bushings, thin-head versions, fully hardened grades and large sprue bushings are all available. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e with your dimensions, SR and gate diameter, and we will come back within one business day.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. See \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times. Import duties and taxes are the buyer's responsibility — please read the duties section on that page before ordering.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Ø10 × 60 (flange Ø35 × 10)","offer_id":52426759602396,"sku":"PMC-SPRC-001","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 60 (flange Ø35 × 15)","offer_id":52426759635164,"sku":"PMC-SPRC-002","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 60 (flange Ø40 × 10)","offer_id":52426759667932,"sku":"PMC-SPRC-003","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 60 (flange Ø50 × 15)","offer_id":52426759700700,"sku":"PMC-SPRC-004","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 70 (flange Ø35 × 10)","offer_id":52426759733468,"sku":"PMC-SPRC-005","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 70 (flange Ø35 × 15)","offer_id":52426759766236,"sku":"PMC-SPRC-006","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 70 (flange Ø40 × 10)","offer_id":52426759799004,"sku":"PMC-SPRC-007","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 70 (flange Ø50 × 15)","offer_id":52426759831772,"sku":"PMC-SPRC-008","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 80 (flange Ø35 × 10)","offer_id":52426759864540,"sku":"PMC-SPRC-009","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 80 (flange Ø35 × 15)","offer_id":52426759897308,"sku":"PMC-SPRC-010","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 80 (flange Ø40 × 10)","offer_id":52426759930076,"sku":"PMC-SPRC-011","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 80 (flange Ø50 × 15)","offer_id":52426759962844,"sku":"PMC-SPRC-012","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 90 (flange Ø35 × 10)","offer_id":52426759995612,"sku":"PMC-SPRC-013","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 90 (flange Ø35 × 15)","offer_id":52426760028380,"sku":"PMC-SPRC-014","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 90 (flange Ø40 × 10)","offer_id":52426760061148,"sku":"PMC-SPRC-015","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 90 (flange Ø50 × 15)","offer_id":52426760093916,"sku":"PMC-SPRC-016","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 100 (flange Ø35 × 10)","offer_id":52426760126684,"sku":"PMC-SPRC-017","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 100 (flange Ø35 × 15)","offer_id":52426760159452,"sku":"PMC-SPRC-018","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 100 (flange Ø40 × 10)","offer_id":52426760192220,"sku":"PMC-SPRC-019","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 100 (flange Ø50 × 15)","offer_id":52426760224988,"sku":"PMC-SPRC-020","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 60 (flange Ø35 × 10)","offer_id":52426760257756,"sku":"PMC-SPRC-021","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 60 (flange Ø35 × 15)","offer_id":52426760290524,"sku":"PMC-SPRC-022","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 60 (flange Ø40 × 10)","offer_id":52426760323292,"sku":"PMC-SPRC-023","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 60 (flange Ø40 × 15)","offer_id":52426760356060,"sku":"PMC-SPRC-024","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 60 (flange Ø50 × 10)","offer_id":52426760388828,"sku":"PMC-SPRC-025","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 60 (flange Ø50 × 15)","offer_id":52426760421596,"sku":"PMC-SPRC-026","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 70 (flange Ø35 × 10)","offer_id":52426760454364,"sku":"PMC-SPRC-027","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 70 (flange Ø35 × 15)","offer_id":52426760487132,"sku":"PMC-SPRC-028","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 70 (flange Ø40 × 10)","offer_id":52426760519900,"sku":"PMC-SPRC-029","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 70 (flange Ø40 × 15)","offer_id":52426760552668,"sku":"PMC-SPRC-030","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 70 (flange Ø50 × 10)","offer_id":52426760585436,"sku":"PMC-SPRC-031","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 70 (flange Ø50 × 15)","offer_id":52426760618204,"sku":"PMC-SPRC-032","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 80 (flange Ø35 × 10)","offer_id":52426760650972,"sku":"PMC-SPRC-033","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 80 (flange Ø35 × 15)","offer_id":52426760683740,"sku":"PMC-SPRC-034","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 80 (flange Ø40 × 10)","offer_id":52426760716508,"sku":"PMC-SPRC-035","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 80 (flange Ø40 × 15)","offer_id":52426760749276,"sku":"PMC-SPRC-036","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 80 (flange Ø50 × 10)","offer_id":52426760782044,"sku":"PMC-SPRC-037","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 80 (flange Ø50 × 15)","offer_id":52426760814812,"sku":"PMC-SPRC-038","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 90 (flange Ø35 × 10)","offer_id":52426760847580,"sku":"PMC-SPRC-039","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 90 (flange Ø35 × 15)","offer_id":52426760880348,"sku":"PMC-SPRC-040","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 90 (flange Ø40 × 10)","offer_id":52426760913116,"sku":"PMC-SPRC-041","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 90 (flange Ø40 × 15)","offer_id":52426760945884,"sku":"PMC-SPRC-042","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 90 (flange Ø50 × 10)","offer_id":52426760978652,"sku":"PMC-SPRC-043","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 90 (flange Ø50 × 15)","offer_id":52426761011420,"sku":"PMC-SPRC-044","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 100 (flange Ø35 × 10)","offer_id":52426761044188,"sku":"PMC-SPRC-045","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 100 (flange Ø35 × 15)","offer_id":52426761076956,"sku":"PMC-SPRC-046","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 100 (flange Ø40 × 10)","offer_id":52426761109724,"sku":"PMC-SPRC-047","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 100 (flange Ø40 × 15)","offer_id":52426761142492,"sku":"PMC-SPRC-048","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 100 (flange Ø50 × 10)","offer_id":52426761175260,"sku":"PMC-SPRC-049","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 100 (flange Ø50 × 15)","offer_id":52426761208028,"sku":"PMC-SPRC-050","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 110 (flange Ø50 × 10)","offer_id":52426761240796,"sku":"PMC-SPRC-051","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 120 (flange Ø35 × 15)","offer_id":52426761273564,"sku":"PMC-SPRC-052","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 120 (flange Ø40 × 10)","offer_id":52426761306332,"sku":"PMC-SPRC-053","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 120 (flange Ø40 × 15)","offer_id":52426761339100,"sku":"PMC-SPRC-054","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 120 (flange Ø50 × 10)","offer_id":52426761371868,"sku":"PMC-SPRC-055","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 120 (flange Ø50 × 15)","offer_id":52426761404636,"sku":"PMC-SPRC-056","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 130 (flange Ø35 × 15)","offer_id":52426761437404,"sku":"PMC-SPRC-057","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 130 (flange Ø50 × 15)","offer_id":52426761470172,"sku":"PMC-SPRC-058","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 140 (flange Ø35 × 15)","offer_id":52426761502940,"sku":"PMC-SPRC-059","price":23.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 140 (flange Ø50 × 15)","offer_id":52426761535708,"sku":"PMC-SPRC-060","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 150 (flange Ø35 × 15)","offer_id":52426761568476,"sku":"PMC-SPRC-061","price":25.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 150 (flange Ø50 × 15)","offer_id":52426761601244,"sku":"PMC-SPRC-062","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 160 (flange Ø50 × 15)","offer_id":52426761634012,"sku":"PMC-SPRC-063","price":35.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 170 (flange Ø50 × 15)","offer_id":52426761666780,"sku":"PMC-SPRC-064","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 180 (flange Ø50 × 15)","offer_id":52426761699548,"sku":"PMC-SPRC-065","price":52.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 190 (flange Ø50 × 15)","offer_id":52426761732316,"sku":"PMC-SPRC-066","price":61.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 200 (flange Ø50 × 15)","offer_id":52426761765084,"sku":"PMC-SPRC-067","price":71.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 50 (flange Ø35 × 15)","offer_id":52426761797852,"sku":"PMC-SPRC-068","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 60 (flange Ø35 × 15)","offer_id":52426761830620,"sku":"PMC-SPRC-069","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 60 (flange Ø40 × 10)","offer_id":52426761863388,"sku":"PMC-SPRC-070","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 60 (flange Ø50 × 10)","offer_id":52426761896156,"sku":"PMC-SPRC-071","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 60 (flange Ø50 × 15)","offer_id":52426761928924,"sku":"PMC-SPRC-072","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 70 (flange Ø35 × 15)","offer_id":52426761961692,"sku":"PMC-SPRC-073","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 70 (flange Ø40 × 10)","offer_id":52426761994460,"sku":"PMC-SPRC-074","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 70 (flange Ø40 × 15)","offer_id":52426762027228,"sku":"PMC-SPRC-075","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 70 (flange Ø50 × 10)","offer_id":52426762059996,"sku":"PMC-SPRC-076","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 70 (flange Ø50 × 15)","offer_id":52426762092764,"sku":"PMC-SPRC-077","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 80 (flange Ø35 × 15)","offer_id":52426762125532,"sku":"PMC-SPRC-078","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 80 (flange Ø40 × 10)","offer_id":52426762158300,"sku":"PMC-SPRC-079","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 80 (flange Ø40 × 15)","offer_id":52426762191068,"sku":"PMC-SPRC-080","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 80 (flange Ø50 × 10)","offer_id":52426762223836,"sku":"PMC-SPRC-081","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 80 (flange Ø50 × 15)","offer_id":52426762256604,"sku":"PMC-SPRC-082","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 90 (flange Ø35 × 15)","offer_id":52426762289372,"sku":"PMC-SPRC-083","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 90 (flange Ø40 × 10)","offer_id":52426762322140,"sku":"PMC-SPRC-084","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 90 (flange Ø40 × 15)","offer_id":52426762354908,"sku":"PMC-SPRC-085","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 90 (flange Ø50 × 10)","offer_id":52426762387676,"sku":"PMC-SPRC-086","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 90 (flange Ø50 × 15)","offer_id":52426762420444,"sku":"PMC-SPRC-087","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 100 (flange Ø35 × 15)","offer_id":52426762453212,"sku":"PMC-SPRC-088","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 100 (flange Ø40 × 10)","offer_id":52426762485980,"sku":"PMC-SPRC-089","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 100 (flange Ø40 × 15)","offer_id":52426762518748,"sku":"PMC-SPRC-090","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 100 (flange Ø50 × 10)","offer_id":52426762551516,"sku":"PMC-SPRC-091","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 100 (flange Ø50 × 15)","offer_id":52426762584284,"sku":"PMC-SPRC-092","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 110 (flange Ø35 × 15)","offer_id":52426762617052,"sku":"PMC-SPRC-093","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 110 (flange Ø50 × 10)","offer_id":52426762649820,"sku":"PMC-SPRC-094","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 110 (flange Ø50 × 15)","offer_id":52426762682588,"sku":"PMC-SPRC-095","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 120 (flange Ø35 × 15)","offer_id":52426762715356,"sku":"PMC-SPRC-096","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 120 (flange Ø40 × 10)","offer_id":52426762748124,"sku":"PMC-SPRC-097","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 120 (flange Ø40 × 15)","offer_id":52426762780892,"sku":"PMC-SPRC-098","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 120 (flange Ø50 × 10)","offer_id":52426762813660,"sku":"PMC-SPRC-099","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 120 (flange Ø50 × 15)","offer_id":52426762846428,"sku":"PMC-SPRC-100","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 130 (flange Ø35 × 15)","offer_id":52426762879196,"sku":"PMC-SPRC-101","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 130 (flange Ø50 × 15)","offer_id":52426762911964,"sku":"PMC-SPRC-102","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 140 (flange Ø35 × 15)","offer_id":52426762944732,"sku":"PMC-SPRC-103","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 140 (flange Ø50 × 15)","offer_id":52426762977500,"sku":"PMC-SPRC-104","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 150 (flange Ø50 × 15)","offer_id":52426763010268,"sku":"PMC-SPRC-105","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 160 (flange Ø50 × 15)","offer_id":52426763043036,"sku":"PMC-SPRC-106","price":35.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 170 (flange Ø50 × 15)","offer_id":52426763075804,"sku":"PMC-SPRC-107","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 180 (flange Ø50 × 15)","offer_id":52426763108572,"sku":"PMC-SPRC-108","price":52.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 190 (flange Ø50 × 15)","offer_id":52426763141340,"sku":"PMC-SPRC-109","price":61.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 200 (flange Ø50 × 15)","offer_id":52426763174108,"sku":"PMC-SPRC-110","price":71.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 70 (flange Ø50 × 15)","offer_id":52426763206876,"sku":"PMC-SPRC-111","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 80 (flange Ø50 × 15)","offer_id":52426763239644,"sku":"PMC-SPRC-112","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 90 (flange Ø50 × 15)","offer_id":52426763272412,"sku":"PMC-SPRC-113","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 100 (flange Ø50 × 15)","offer_id":52426763305180,"sku":"PMC-SPRC-114","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 120 (flange Ø50 × 15)","offer_id":52426763337948,"sku":"PMC-SPRC-115","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 130 (flange Ø50 × 15)","offer_id":52426763370716,"sku":"PMC-SPRC-116","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 140 (flange Ø50 × 15)","offer_id":52426763403484,"sku":"PMC-SPRC-117","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 150 (flange Ø50 × 15)","offer_id":52426763436252,"sku":"PMC-SPRC-118","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 160 (flange Ø50 × 15)","offer_id":52426763469020,"sku":"PMC-SPRC-119","price":35.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 170 (flange Ø50 × 15)","offer_id":52426763501788,"sku":"PMC-SPRC-120","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 200 (flange Ø50 × 15)","offer_id":52426763534556,"sku":"PMC-SPRC-121","price":71.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 180 (flange Ø50 × 15)","offer_id":52426763567324,"sku":"PMC-SPRC-122","price":52.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 190 (flange Ø50 × 15)","offer_id":52426763600092,"sku":"PMC-SPRC-123","price":61.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/c-type-sprue-bushing-hero.png?v=1788929598"},{"product_id":"through-hardened-ejector-pins-pack-of-10","title":"Through-Hardened Ejector Pins — Pack of 10","description":"\u003cp\u003eThrough-hardened ejector pins, sold in packs of 10. Sizes are given as \u003cstrong\u003ediameter × length\u003c\/strong\u003e in millimetres.\u003c\/p\u003e\n\n\u003ch2\u003eThrough-hardened or nitrided — which do you need?\u003c\/h2\u003e\n\u003cp\u003eWe stock both, and the choice is not about which is \"better\". They fail differently.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eThrough-hardened (this page)\u003c\/th\u003e\n\u003cth\u003eNitrided SKD61\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHard all the way through — see the note below\u003c\/td\u003e\n\u003ctd\u003e700–900 HV case over a 35–42 HRC core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWear resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConsistent, and it stays that way after cutting or regrinding\u003c\/td\u003e\n\u003ctd\u003eHigh at the surface only; a cut face is soft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eToughness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLower — more likely to snap than to bend\u003c\/td\u003e\n\u003ctd\u003eHigher — the soft core absorbs shock and side load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBest for\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAbrasive and glass-filled resins, high shot counts, pins that get cut or reground\u003c\/td\u003e\n\u003ctd\u003eGeneral work, long thin pins, tools with any misalignment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe practical rule: if your pins are wearing out, go through-hardened. If they are breaking, go nitrided — a harder pin will break sooner, not later. \u003ca href=\"\/products\/skd61-nitrided-ejector-pins-pack-of-10\"\u003eSee the nitrided SKD61 pins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eHardness — and why we confirm it rather than print one number\u003c\/h2\u003e\n\u003cp\u003e\"Through-hardened\" covers two different materials, and the hardness follows the steel, not the label:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eTypical through-hardness\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKD61 \/ H13, vacuum hardened\u003c\/td\u003e\n\u003ctd\u003e48–52 HRC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKH51 high-speed steel\u003c\/td\u003e\n\u003ctd\u003eHigher, into the low 60s HRC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBe sceptical of any supplier offering an H13 pin at 60 HRC through-section. H13 is an air-hardening hot-work steel; taken much past the low 50s it loses the toughness that made it worth using, and most reputable makers stop around 52. A genuine 60+ HRC pin is high-speed steel and is priced accordingly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe confirm the material and the measured hardness for your batch in writing before shipping\u003c\/strong\u003e, and a hardness report can be supplied with the order. Tell us the resin, the filler content and roughly how many shots the tool runs a year, and we will tell you which grade we would fit rather than leaving you to guess from a catalogue number.\u003c\/p\u003e\n\n\u003ch2\u003eWhy these cost more than the nitrided pins\u003c\/h2\u003e\n\u003cp\u003eThe premium is mostly material grade, not process time. A through-hardened pin starts from a higher-specification bar and is harder to grind once treated, so cost runs roughly two to four times nitrided SKD61 at the same size. We price from actual supplier cost rather than smoothing it into a tidy ladder.\u003c\/p\u003e\n\u003cp\u003eIf your application does not need the wear resistance, the nitrided pins are cheaper and tougher — we would rather tell you that than sell you the dearer one.\u003c\/p\u003e\n\n\u003ch2\u003eCutting and regrinding\u003c\/h2\u003e\n\u003cp\u003eThis is where through-hardened pins earn their price. A nitrided pin cut to length exposes soft core material at the cut face; a through-hardened pin is the same hardness at the cut as it was in the middle. If your shop routinely cuts pins to fit or regrinds worn faces rather than replacing them, through-hardened will outlast nitrided by a wide margin.\u003c\/p\u003e\n\u003cp\u003eThe same hardness makes them harder to cut. Use an abrasive wheel or wire EDM, not a hacksaw.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCondition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVacuum through-hardened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConfirmed on order — see the note above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiameters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ1.5, 2, 2.5, 3, 4, 5, 6, 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2\u003eLarger and longer sizes\u003c\/h2\u003e\n\u003cp\u003eØ10, Ø12 and Ø16, and lengths up to 500 mm, are all made — they are just too heavy to ship sensibly at a flat parcel rate. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e for those and we will price the freight properly against your destination, which usually works out better for you than a flat rate would.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing a size\u003c\/h2\u003e\n\u003cp\u003ePins are supplied at nominal length and cut to fit at the head end. Measure the plate stack rather than the old pin if the old one was already cut. If you are unsure whether you need through-hardened or nitrided, describe the application and we will give you a straight answer — including telling you when the cheaper nitrided pin is the better part.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. Pins are packed in rigid tubes. See \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times. Import duties and taxes are the buyer's responsibility — please read the duties section on that page before ordering.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"1.5 × 100","offer_id":52427890295004,"sku":"PMC-TEJP-001","price":32.9,"currency_code":"USD","in_stock":true},{"title":"1.5 × 150","offer_id":52427890327772,"sku":"PMC-TEJP-002","price":39.9,"currency_code":"USD","in_stock":true},{"title":"1.5 × 200","offer_id":52427890360540,"sku":"PMC-TEJP-003","price":42.9,"currency_code":"USD","in_stock":true},{"title":"2 × 100","offer_id":52427890393308,"sku":"PMC-TEJP-004","price":29.9,"currency_code":"USD","in_stock":true},{"title":"2 × 150","offer_id":52427890426076,"sku":"PMC-TEJP-005","price":35.9,"currency_code":"USD","in_stock":true},{"title":"2 × 200","offer_id":52427890458844,"sku":"PMC-TEJP-006","price":42.9,"currency_code":"USD","in_stock":true},{"title":"2 × 250","offer_id":52427890491612,"sku":"PMC-TEJP-007","price":52.9,"currency_code":"USD","in_stock":true},{"title":"2.5 × 100","offer_id":52427890524380,"sku":"PMC-TEJP-008","price":26.9,"currency_code":"USD","in_stock":true},{"title":"2.5 × 150","offer_id":52427890557148,"sku":"PMC-TEJP-009","price":32.9,"currency_code":"USD","in_stock":true},{"title":"2.5 × 200","offer_id":52427890589916,"sku":"PMC-TEJP-010","price":42.9,"currency_code":"USD","in_stock":true},{"title":"2.5 × 250","offer_id":52427890622684,"sku":"PMC-TEJP-011","price":52.9,"currency_code":"USD","in_stock":true},{"title":"3 × 100","offer_id":52427890655452,"sku":"PMC-TEJP-012","price":26.9,"currency_code":"USD","in_stock":true},{"title":"3 × 150","offer_id":52427890688220,"sku":"PMC-TEJP-013","price":29.9,"currency_code":"USD","in_stock":true},{"title":"3 × 200","offer_id":52427890720988,"sku":"PMC-TEJP-014","price":35.9,"currency_code":"USD","in_stock":true},{"title":"3 × 250","offer_id":52427890753756,"sku":"PMC-TEJP-015","price":42.9,"currency_code":"USD","in_stock":true},{"title":"4 × 100","offer_id":52427890786524,"sku":"PMC-TEJP-016","price":26.9,"currency_code":"USD","in_stock":true},{"title":"4 × 150","offer_id":52427890819292,"sku":"PMC-TEJP-017","price":35.9,"currency_code":"USD","in_stock":true},{"title":"4 × 200","offer_id":52427890852060,"sku":"PMC-TEJP-018","price":42.9,"currency_code":"USD","in_stock":true},{"title":"4 × 250","offer_id":52427890884828,"sku":"PMC-TEJP-019","price":48.9,"currency_code":"USD","in_stock":true},{"title":"5 × 100","offer_id":52427890917596,"sku":"PMC-TEJP-020","price":32.9,"currency_code":"USD","in_stock":true},{"title":"5 × 150","offer_id":52427890950364,"sku":"PMC-TEJP-021","price":39.9,"currency_code":"USD","in_stock":true},{"title":"5 × 200","offer_id":52427890983132,"sku":"PMC-TEJP-022","price":48.9,"currency_code":"USD","in_stock":true},{"title":"5 × 250","offer_id":52427891015900,"sku":"PMC-TEJP-023","price":55.9,"currency_code":"USD","in_stock":true},{"title":"6 × 100","offer_id":52427891048668,"sku":"PMC-TEJP-024","price":39.9,"currency_code":"USD","in_stock":true},{"title":"6 × 150","offer_id":52427891081436,"sku":"PMC-TEJP-025","price":45.9,"currency_code":"USD","in_stock":true},{"title":"6 × 200","offer_id":52427891114204,"sku":"PMC-TEJP-026","price":52.9,"currency_code":"USD","in_stock":true},{"title":"6 × 250","offer_id":52427891146972,"sku":"PMC-TEJP-027","price":58.9,"currency_code":"USD","in_stock":true},{"title":"8 × 100","offer_id":52427891179740,"sku":"PMC-TEJP-028","price":45.9,"currency_code":"USD","in_stock":true},{"title":"8 × 150","offer_id":52427891212508,"sku":"PMC-TEJP-029","price":58.9,"currency_code":"USD","in_stock":true},{"title":"8 × 200","offer_id":52427891245276,"sku":"PMC-TEJP-030","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/through-hardened-ejector-pins-pack-of-10-main.png?v=1788927493"},{"product_id":"mold-return-pins-pack-of-4","title":"Mold Return Pins — Pack of 4","description":"\u003cp\u003eReturn pins for injection mold ejector systems, sold in \u003cstrong\u003epacks of 4\u003c\/strong\u003e — the quantity a standard mold uses. Sizes are given as \u003cstrong\u003ediameter × length\u003c\/strong\u003e in millimetres.\u003c\/p\u003e\n\n\u003ch2\u003eWhat they do, and why all four matter\u003c\/h2\u003e\n\u003cp\u003eReturn pins push the ejector plate back to its home position as the mold closes, before the core and cavity meet. They work as a set of four at the corners of the ejector plate, and their job is as much about keeping that plate square as it is about returning it.\u003c\/p\u003e\n\u003cp\u003eThat is why we sell them in fours. Replacing one worn pin out of four leaves you with three worn pins and one tight new one, which cocks the plate slightly on every stroke — and a cocked ejector plate is what turns into bent ejector pins, galled guide bushings and a plate that sticks halfway. If one has worn enough to need replacing, the other three are the same age.\u003c\/p\u003e\n\n\u003ch2\u003eLength is not optional\u003c\/h2\u003e\n\u003cp\u003eThe return pin face has to finish exactly flush with the parting line. Proud, and the pin holds the mold open a fraction — you get flash all round the parting line and, on a bad day, a damaged face when the machine clamps anyway. Short, and the ejector plate never fully returns, so the ejector pins stand proud into the cavity and the next shot mars or short-fills.\u003c\/p\u003e\n\u003cp\u003eMeasure the existing pin, or measure from the ejector plate seat to the parting face with the plate fully back. If you are working from a drawing rather than a tool, tell us the plate stack and we will confirm the length before shipping.\u003c\/p\u003e\n\n\u003ch2\u003eCheck the springs at the same time\u003c\/h2\u003e\n\u003cp\u003eReturn pins are usually fitted alongside ejector return springs, and a weak spring makes a good return pin look faulty — the plate does not start home, then the pins take the whole load at close instead of easing it back. If you are replacing return pins on an older tool, it is worth checking the springs in the same shutdown. \u003ca href=\"\/collections\/die-springs\"\u003eSee die springs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiameters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ12, Ø16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ12: 80–250 mm  |  Ø16: 100–140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 pieces — one mold set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2\u003eLarger diameters and longer pins\u003c\/h2\u003e\n\u003cp\u003eØ15, Ø20, Ø25 and Ø30 are all stocked, in lengths to 500 mm — but a set of four Ø25 pins is several kilograms and does not belong on a flat parcel rate. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e for those and we will price the freight properly against your destination rather than bury it in the item price. Tapped return pins are also available.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. See \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times. Import duties and taxes are the buyer's responsibility — please read the duties section on that page before ordering.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"12 × 80","offer_id":52427891441884,"sku":"PMC-RETP-001","price":10.9,"currency_code":"USD","in_stock":true},{"title":"12 × 90","offer_id":52427891474652,"sku":"PMC-RETP-002","price":12.9,"currency_code":"USD","in_stock":true},{"title":"12 × 100","offer_id":52427891507420,"sku":"PMC-RETP-003","price":13.9,"currency_code":"USD","in_stock":true},{"title":"12 × 110","offer_id":52427891540188,"sku":"PMC-RETP-004","price":14.9,"currency_code":"USD","in_stock":true},{"title":"12 × 120","offer_id":52427891572956,"sku":"PMC-RETP-005","price":15.9,"currency_code":"USD","in_stock":true},{"title":"12 × 130","offer_id":52427891605724,"sku":"PMC-RETP-006","price":16.9,"currency_code":"USD","in_stock":true},{"title":"12 × 140","offer_id":52427891638492,"sku":"PMC-RETP-007","price":17.9,"currency_code":"USD","in_stock":true},{"title":"12 × 150","offer_id":52427891671260,"sku":"PMC-RETP-008","price":18.9,"currency_code":"USD","in_stock":true},{"title":"12 × 160","offer_id":52427891704028,"sku":"PMC-RETP-009","price":19.9,"currency_code":"USD","in_stock":true},{"title":"12 × 170","offer_id":52427891736796,"sku":"PMC-RETP-010","price":20.9,"currency_code":"USD","in_stock":true},{"title":"12 × 180","offer_id":52427891769564,"sku":"PMC-RETP-011","price":21.9,"currency_code":"USD","in_stock":true},{"title":"12 × 190","offer_id":52427891802332,"sku":"PMC-RETP-012","price":24.9,"currency_code":"USD","in_stock":true},{"title":"12 × 200","offer_id":52427891835100,"sku":"PMC-RETP-013","price":28.9,"currency_code":"USD","in_stock":true},{"title":"12 × 210","offer_id":52427891867868,"sku":"PMC-RETP-014","price":32.9,"currency_code":"USD","in_stock":true},{"title":"12 × 220","offer_id":52427891900636,"sku":"PMC-RETP-015","price":34.9,"currency_code":"USD","in_stock":true},{"title":"12 × 230","offer_id":52427891933404,"sku":"PMC-RETP-016","price":38.9,"currency_code":"USD","in_stock":true},{"title":"12 × 240","offer_id":52427891966172,"sku":"PMC-RETP-017","price":42.9,"currency_code":"USD","in_stock":true},{"title":"12 × 250","offer_id":52427891998940,"sku":"PMC-RETP-018","price":45.9,"currency_code":"USD","in_stock":true},{"title":"16 × 100","offer_id":52427892031708,"sku":"PMC-RETP-019","price":16.9,"currency_code":"USD","in_stock":true},{"title":"16 × 110","offer_id":52427892064476,"sku":"PMC-RETP-020","price":17.9,"currency_code":"USD","in_stock":true},{"title":"16 × 120","offer_id":52427892097244,"sku":"PMC-RETP-021","price":19.9,"currency_code":"USD","in_stock":true},{"title":"16 × 130","offer_id":52427892130012,"sku":"PMC-RETP-022","price":20.9,"currency_code":"USD","in_stock":true},{"title":"16 × 140","offer_id":52427892162780,"sku":"PMC-RETP-023","price":21.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/mold-return-pins-pack-of-4-main.png?v=1788927725"},{"product_id":"blade-ejector-pins-flat-ejector-pins-pack-of-5","title":"Blade Ejector Pins (Flat Ejector Pins) — Pack of 5","description":"\u003cp\u003eBlade (flat) ejector pins for injection molds, sold in packs of 5. Used where a round pin will not fit or will not eject — thin ribs, deep narrow bosses, and the tight corners a round pin cannot reach without leaving a witness on a visible face.\u003c\/p\u003e\n\n\u003ch2\u003eHow the size is written\u003c\/h2\u003e\n\u003cp\u003eWe use \u003cstrong\u003eW × P × D × L\u003c\/strong\u003e, matching the standard blade-pin ordering convention:\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eW\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlade thickness — the narrow dimension of the flat section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlade width — the wide dimension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRound shank diameter behind the blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSo \u003ccode\u003eW1.5 × P4 × D5 × L200\u003c\/code\u003e is a 1.5 × 4 mm blade on a Ø5 shank, 200 mm overall. All dimensions in millimetres. The blade section runs a standard length from the working end; if your plate stack needs a specific blade length (N), tell us and we will confirm it before cutting.\u003c\/p\u003e\n\n\u003ch2\u003eGetting the blade orientation right\u003c\/h2\u003e\n\u003cp\u003eA blade pin only works if the flat is aligned with the rib it ejects. That means it has to be keyed or pinned against rotation — a blade pin dropped into a round hole with no anti-rotation feature will turn, and the first time it turns it will either shear the rib off the part or jam against the core.\u003c\/p\u003e\n\u003cp\u003eIf you are fitting blade pins to a plate that previously carried round pins, budget for the anti-rotation work as part of the job, not as an afterthought. The commonest arrangement is a flat ground on the head seating against a matching flat in the retainer plate.\u003c\/p\u003e\n\n\u003ch2\u003eWhy blade pins break where they do\u003c\/h2\u003e\n\u003cp\u003eBlades fail at the step between the flat and the round shank, not in the middle of the blade. That is the stress concentration, and it is why the shank diameter matters as much as the blade size: a 1 mm blade on a Ø5 shank survives longer than the same blade on a Ø4, because the step is gentler.\u003c\/p\u003e\n\u003cp\u003eIf you are replacing blade pins more than once a year, the fix is usually a larger shank or a slightly thicker blade rather than a harder pin. Going harder at the same geometry makes them snap sooner, not later.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial and hardness\u003c\/h2\u003e\n\u003cp\u003eBlade pins are made in two treatments, and they behave differently:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNitrided SKD61\u003c\/strong\u003e — hard case over a tougher core. More forgiving of the side loads and slight misalignment blade pins tend to see.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrough-hardened SKD61\u003c\/strong\u003e — hard throughout, typically in the high 40s HRC for blade sections. Better wear life, less tolerance for shock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe confirm which treatment and what hardness you are getting in writing before your order ships.\u003c\/strong\u003e Tell us the resin and roughly how many shots the tool runs, and we will tell you which one we would fit. We would rather confirm the figure against the batch than publish a hardness you might specify a tool around.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBlade thickness (W)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.0, 1.2, 1.5, 2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBlade width (P)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 – 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShank diameter (D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ4 – Ø10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall length (L)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e150, 200, 250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eNot every W \/ P \/ D combination exists — the size selector shows only what is actually made. Blade thickness and blade width are matched to the shank, so you cannot put an 8 mm wide blade on a Ø4 shank.\u003c\/p\u003e\n\n\u003ch2\u003eCutting to length\u003c\/h2\u003e\n\u003cp\u003eBlade pins are supplied at nominal length and cut at the head end to fit. Never shorten a blade pin from the blade end — the blade profile and its radius into the shank are ground, and cutting there removes the geometry the pin depends on.\u003c\/p\u003e\n\n\u003ch2\u003eNeed a size that is not listed?\u003c\/h2\u003e\n\u003cp\u003eW0.8 blades, specified blade lengths (N), non-standard head sizes such as 8 × 5 and 8 × 6, and lengths outside 150–250 mm are all made to order. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e with your W × P × D × L, or send a photo of the broken pin next to a caliper — for blade pins, a photo of the blade end is usually more useful than a drawing.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. Blade pins are packed in rigid tubes with the blade ends protected. See \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times. Import duties and taxes are the buyer's responsibility.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"W1 × P3 × D4 × L200","offer_id":52427898093788,"sku":"PMC-BLDE-001","price":21.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P3 × D4 × L200","offer_id":52427898126556,"sku":"PMC-BLDE-002","price":21.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P3 × D4 × L150","offer_id":52427898159324,"sku":"PMC-BLDE-003","price":18.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P3 × D4 × L200","offer_id":52427898192092,"sku":"PMC-BLDE-004","price":21.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P3 × D4 × L150","offer_id":52427898224860,"sku":"PMC-BLDE-005","price":21.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P3 × D4 × L200","offer_id":52427898257628,"sku":"PMC-BLDE-006","price":21.9,"currency_code":"USD","in_stock":true},{"title":"W0.8 × P4 × D5 × L150","offer_id":52427898290396,"sku":"PMC-BLDE-007","price":18.9,"currency_code":"USD","in_stock":true},{"title":"W0.8 × P4 × D5 × L200","offer_id":52427898323164,"sku":"PMC-BLDE-008","price":23.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P4 × D5 × L150","offer_id":52427898355932,"sku":"PMC-BLDE-009","price":18.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P4 × D5 × L200","offer_id":52427898388700,"sku":"PMC-BLDE-010","price":22.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P4 × D5 × L250","offer_id":52427898421468,"sku":"PMC-BLDE-011","price":27.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P4 × D5 × L150","offer_id":52427898454236,"sku":"PMC-BLDE-012","price":18.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P4 × D5 × L200","offer_id":52427898487004,"sku":"PMC-BLDE-013","price":22.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P4 × D5 × L250","offer_id":52427898519772,"sku":"PMC-BLDE-014","price":28.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P4 × D5 × L150","offer_id":52427898552540,"sku":"PMC-BLDE-015","price":18.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P4 × D5 × L200","offer_id":52427898585308,"sku":"PMC-BLDE-016","price":22.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P4 × D5 × L250","offer_id":52427898618076,"sku":"PMC-BLDE-017","price":28.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P4 × D5 × L150","offer_id":52427898650844,"sku":"PMC-BLDE-018","price":18.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P4 × D5 × L200","offer_id":52427898683612,"sku":"PMC-BLDE-019","price":22.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P4 × D5 × L250","offer_id":52427898716380,"sku":"PMC-BLDE-020","price":28.9,"currency_code":"USD","in_stock":true},{"title":"W0.8 × P5 × D6 × L150","offer_id":52427898749148,"sku":"PMC-BLDE-021","price":21.9,"currency_code":"USD","in_stock":true},{"title":"W0.8 × P5 × D6 × L200","offer_id":52427898781916,"sku":"PMC-BLDE-022","price":28.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P5 × D6 × L150","offer_id":52427898814684,"sku":"PMC-BLDE-023","price":22.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P5 × D6 × L200","offer_id":52427898847452,"sku":"PMC-BLDE-024","price":28.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P5 × D6 × L250","offer_id":52427898880220,"sku":"PMC-BLDE-025","price":34.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P5 × D6 × L150","offer_id":52427898912988,"sku":"PMC-BLDE-026","price":21.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P5 × D6 × L200","offer_id":52427898945756,"sku":"PMC-BLDE-027","price":28.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P5 × D6 × L250","offer_id":52427898978524,"sku":"PMC-BLDE-028","price":34.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P5 × D6 × L150","offer_id":52427899011292,"sku":"PMC-BLDE-029","price":21.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P5 × D6 × L200","offer_id":52427899044060,"sku":"PMC-BLDE-030","price":28.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P5 × D6 × L250","offer_id":52427899076828,"sku":"PMC-BLDE-031","price":34.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P5 × D6 × L150","offer_id":52427899109596,"sku":"PMC-BLDE-032","price":21.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P5 × D6 × L200","offer_id":52427899142364,"sku":"PMC-BLDE-033","price":28.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P5 × D6 × L250","offer_id":52427899175132,"sku":"PMC-BLDE-034","price":34.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P6 × D7 × L150","offer_id":52427899207900,"sku":"PMC-BLDE-035","price":25.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P6 × D7 × L200","offer_id":52427899240668,"sku":"PMC-BLDE-036","price":32.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P6 × D7 × L250","offer_id":52427899273436,"sku":"PMC-BLDE-037","price":40.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P6 × D7 × L150","offer_id":52427899306204,"sku":"PMC-BLDE-038","price":25.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P6 × D7 × L200","offer_id":52427899338972,"sku":"PMC-BLDE-039","price":32.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P6 × D7 × L250","offer_id":52427899371740,"sku":"PMC-BLDE-040","price":40.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P6 × D7 × L150","offer_id":52427899404508,"sku":"PMC-BLDE-041","price":25.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P6 × D7 × L200","offer_id":52427899437276,"sku":"PMC-BLDE-042","price":32.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P6 × D7 × L250","offer_id":52427899470044,"sku":"PMC-BLDE-043","price":40.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P6 × D7 × L150","offer_id":52427899502812,"sku":"PMC-BLDE-044","price":25.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P6 × D7 × L200","offer_id":52427899535580,"sku":"PMC-BLDE-045","price":32.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P6 × D7 × L250","offer_id":52427899568348,"sku":"PMC-BLDE-046","price":40.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P6 × D8 × L150","offer_id":52427899601116,"sku":"PMC-BLDE-047","price":29.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P6 × D8 × L200","offer_id":52427899633884,"sku":"PMC-BLDE-048","price":37.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P6 × D8 × L250","offer_id":52427899666652,"sku":"PMC-BLDE-049","price":46.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P7 × D8 × L150","offer_id":52427899699420,"sku":"PMC-BLDE-050","price":29.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P7 × D8 × L200","offer_id":52427899732188,"sku":"PMC-BLDE-051","price":37.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P7 × D8 × L250","offer_id":52427899764956,"sku":"PMC-BLDE-052","price":46.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P6 × D8 × L150","offer_id":52427899797724,"sku":"PMC-BLDE-053","price":29.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P6 × D8 × L200","offer_id":52427899830492,"sku":"PMC-BLDE-054","price":37.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P6 × D8 × L250","offer_id":52427899863260,"sku":"PMC-BLDE-055","price":46.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P7 × D8 × L150","offer_id":52427899896028,"sku":"PMC-BLDE-056","price":29.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P7 × D8 × L200","offer_id":52427899928796,"sku":"PMC-BLDE-057","price":37.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P7 × D8 × L250","offer_id":52427899961564,"sku":"PMC-BLDE-058","price":46.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P6 × D8 × L150","offer_id":52427899994332,"sku":"PMC-BLDE-059","price":28.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P6 × D8 × L200","offer_id":52427900027100,"sku":"PMC-BLDE-060","price":35.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P6 × D8 × L250","offer_id":52427900059868,"sku":"PMC-BLDE-061","price":44.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P7 × D8 × L150","offer_id":52427900092636,"sku":"PMC-BLDE-062","price":29.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P7 × D8 × L200","offer_id":52427900125404,"sku":"PMC-BLDE-063","price":37.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P7 × D8 × L250","offer_id":52427900158172,"sku":"PMC-BLDE-064","price":46.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P6 × D8 × L150","offer_id":52427900190940,"sku":"PMC-BLDE-065","price":29.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P6 × D8 × L200","offer_id":52427900223708,"sku":"PMC-BLDE-066","price":37.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P6 × D8 × L250","offer_id":52427900256476,"sku":"PMC-BLDE-067","price":46.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P7 × D8 × L150","offer_id":52427900289244,"sku":"PMC-BLDE-068","price":29.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P7 × D8 × L200","offer_id":52427900322012,"sku":"PMC-BLDE-069","price":37.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P7 × D8 × L250","offer_id":52427900354780,"sku":"PMC-BLDE-070","price":46.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P8 × D10 × L150","offer_id":52427900387548,"sku":"PMC-BLDE-071","price":40.9,"currency_code":"USD","in_stock":true},{"title":"W1 × P8 × D10 × L200","offer_id":52427900420316,"sku":"PMC-BLDE-072","price":52.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P8 × D10 × L150","offer_id":52427900453084,"sku":"PMC-BLDE-073","price":40.9,"currency_code":"USD","in_stock":true},{"title":"W1.2 × P8 × D10 × L200","offer_id":52427900485852,"sku":"PMC-BLDE-074","price":52.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P8 × D10 × L150","offer_id":52427900518620,"sku":"PMC-BLDE-075","price":40.9,"currency_code":"USD","in_stock":true},{"title":"W1.5 × P8 × D10 × L200","offer_id":52427900551388,"sku":"PMC-BLDE-076","price":52.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P8 × D10 × L150","offer_id":52427900584156,"sku":"PMC-BLDE-077","price":40.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P8 × D10 × L200","offer_id":52427900616924,"sku":"PMC-BLDE-078","price":52.9,"currency_code":"USD","in_stock":true},{"title":"W2 × P8 × D10 × L250","offer_id":52427900649692,"sku":"PMC-BLDE-079","price":53.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/blade-ejector-pins-pack-of-5-main-v2.png?v=1788925295"},{"product_id":"mold-stop-posts-ejector-plate-limit-posts-s45c-pack-of-4","title":"Mold Stop Posts (Ejector Plate Limit Posts), S45C — Pack of 4","description":"\u003cp\u003eMold stop posts (limit posts) in S45C, sold in \u003cstrong\u003epacks of 4\u003c\/strong\u003e — the quantity a standard ejector plate uses. Sizes are given as \u003cstrong\u003eoutside diameter × height\u003c\/strong\u003e, with the mounting thread in brackets. All dimensions in millimetres.\u003c\/p\u003e\n\n\u003ch2\u003eWhat they do\u003c\/h2\u003e\n\u003cp\u003eStop posts sit between the ejector plate and the clamping plate. They set where the ejector plate rests when it is fully back, and they take the impact each time it returns. They are counterbored for a socket head cap screw, so they bolt down rather than press in.\u003c\/p\u003e\n\u003cp\u003eTwo jobs come out of that. First, height: the post length is what actually determines your ejector home position, so it has to be right before the tool ever runs. Second, cleanliness — the posts hold the plate off the clamping face, so flash, swarf and broken pin fragments collect in the gap instead of under the plate. A plate resting directly on the clamping face will sit on the first chip that lands there and cock itself.\u003c\/p\u003e\n\n\u003ch2\u003eWhy we sell them in fours\u003c\/h2\u003e\n\u003cp\u003eThe four posts set the plane the ejector plate rests on. Replacing one worn post out of four leaves the plate tilted by exactly the amount that post has flattened — which is small, and which is why the resulting bent ejector pins and galled guide bushings usually get blamed on something else. If one has peened over enough to need replacing, the other three have taken the same number of returns.\u003c\/p\u003e\n\u003cp\u003eIf you are fitting a new tool, check all four heights against each other with a micrometer before assembly rather than trusting the tolerance.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing a height\u003c\/h2\u003e\n\u003cp\u003eMeasure with the ejector plate fully returned and the mold closed. The post height sets the gap; the gap has to leave the return pin faces flush with the parting line and the ejector pins flush with the cavity. Get the post too tall and the ejector pins stand proud into the cavity at rest — every shot marks. Too short and the return pins bottom before the plate does, so the posts carry no load and the return pins take the impact instead.\u003c\/p\u003e\n\n\u003ch2\u003eThread and counterbore\u003c\/h2\u003e\n\u003cp\u003eEach size is listed with its mounting thread — M5, M6, M7 or M8 — because the same outside diameter is made with more than one thread. Ø15 comes in M5 and M6; Ø25 in M6, M7 and M8; Ø30 to Ø40 in M6 and M8. Check what is already in your plate before ordering, because the counterbore diameter and depth change with the thread and the screw has to sit below the post face.\u003c\/p\u003e\n\u003cp\u003eIf you are drilling new, the smaller thread in a given diameter leaves more material around the counterbore and is the safer choice unless you need the clamp load.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eS45C carbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiameters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ10, 15, 20, 25, 30, 35, 40, 50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeights\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 to 50 mm, depending on diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting thread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM5, M6, M7 or M8 — stated per size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCounterbore\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSized to the thread; confirmed on order if critical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 pieces — one plate set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2\u003eA note on price and size\u003c\/h2\u003e\n\u003cp\u003eThe price ladder here is not a smooth function of diameter and height, because we price from actual supplier cost rather than fitting it to a curve. Some mid-range sizes run cheaper than smaller ones simply because they are made in higher volume. The numbers are the real figures, not a mistake.\u003c\/p\u003e\n\n\u003ch2\u003eLarger and taller posts\u003c\/h2\u003e\n\u003cp\u003eØ45 and Ø50 in taller sections, heights to 80 mm, and KO-post variants in M8 are all stocked — a set of four in those sizes runs to several kilograms and does not belong on a flat parcel rate. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e for those and we will price the freight properly against your destination.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. See \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times. Import duties and taxes are the buyer's responsibility — please read the duties section on that page before ordering.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Ø10 × 20 (M6)","offer_id":52468190478556,"sku":"PMC-STOP-001","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 25 (M6)","offer_id":52468190511324,"sku":"PMC-STOP-002","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 30 (M6)","offer_id":52468190544092,"sku":"PMC-STOP-003","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 35 (M6)","offer_id":52468190576860,"sku":"PMC-STOP-004","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 40 (M6)","offer_id":52468190609628,"sku":"PMC-STOP-005","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 50 (M6)","offer_id":52468190642396,"sku":"PMC-STOP-006","price":9.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 8 (M5)","offer_id":52468190675164,"sku":"PMC-STOP-007","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 10 (M5)","offer_id":52468190707932,"sku":"PMC-STOP-008","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 12 (M5)","offer_id":52468190740700,"sku":"PMC-STOP-009","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 15 (M5)","offer_id":52468190773468,"sku":"PMC-STOP-010","price":8.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 15 (M6)","offer_id":52468190806236,"sku":"PMC-STOP-011","price":8.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 20 (M5)","offer_id":52468190839004,"sku":"PMC-STOP-012","price":8.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 20 (M6)","offer_id":52468190871772,"sku":"PMC-STOP-013","price":8.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 22 (M5)","offer_id":52468190904540,"sku":"PMC-STOP-014","price":17.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 25 (M5)","offer_id":52468190937308,"sku":"PMC-STOP-015","price":17.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 25 (M6)","offer_id":52468190970076,"sku":"PMC-STOP-016","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 30 (M5)","offer_id":52468191002844,"sku":"PMC-STOP-017","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 30 (M6)","offer_id":52468191035612,"sku":"PMC-STOP-018","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 35 (M6)","offer_id":52468191068380,"sku":"PMC-STOP-019","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 40 (M5)","offer_id":52468191101148,"sku":"PMC-STOP-020","price":17.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 40 (M6)","offer_id":52468191133916,"sku":"PMC-STOP-021","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø15 × 50 (M6)","offer_id":52468191166684,"sku":"PMC-STOP-022","price":10.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 10 (M6)","offer_id":52468191199452,"sku":"PMC-STOP-023","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 12 (M6)","offer_id":52468191232220,"sku":"PMC-STOP-024","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 15 (M6)","offer_id":52468191264988,"sku":"PMC-STOP-025","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 20 (M6)","offer_id":52468191297756,"sku":"PMC-STOP-026","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 25 (M6)","offer_id":52468191330524,"sku":"PMC-STOP-027","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 30 (M6)","offer_id":52468191363292,"sku":"PMC-STOP-028","price":8.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 35 (M6)","offer_id":52468191396060,"sku":"PMC-STOP-029","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 40 (M6)","offer_id":52468191428828,"sku":"PMC-STOP-030","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 50 (M6)","offer_id":52468191461596,"sku":"PMC-STOP-031","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 10 (M6)","offer_id":52468191494364,"sku":"PMC-STOP-032","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 12 (M6)","offer_id":52468191527132,"sku":"PMC-STOP-033","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 15 (M6)","offer_id":52468191559900,"sku":"PMC-STOP-034","price":7.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 20 (M6)","offer_id":52468191592668,"sku":"PMC-STOP-035","price":8.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 25 (M6)","offer_id":52468191625436,"sku":"PMC-STOP-036","price":9.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 30 (M6)","offer_id":52468191658204,"sku":"PMC-STOP-037","price":10.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 35 (M6)","offer_id":52468191690972,"sku":"PMC-STOP-038","price":13.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 40 (M6)","offer_id":52468191723740,"sku":"PMC-STOP-039","price":8.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 40 (M7)","offer_id":52468191756508,"sku":"PMC-STOP-040","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 45 (M8)","offer_id":52468191789276,"sku":"PMC-STOP-041","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 50 (M6)","offer_id":52468191822044,"sku":"PMC-STOP-042","price":14.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 50 (M8)","offer_id":52468191854812,"sku":"PMC-STOP-043","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 10 (M6)","offer_id":52468191887580,"sku":"PMC-STOP-044","price":8.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 10 (M8)","offer_id":52468191920348,"sku":"PMC-STOP-045","price":8.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 12 (M6)","offer_id":52468191953116,"sku":"PMC-STOP-046","price":9.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 12 (M8)","offer_id":52468191985884,"sku":"PMC-STOP-047","price":9.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 15 (M6)","offer_id":52468192018652,"sku":"PMC-STOP-048","price":9.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 15 (M8)","offer_id":52468192051420,"sku":"PMC-STOP-049","price":9.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 20 (M6)","offer_id":52468192084188,"sku":"PMC-STOP-050","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 20 (M8)","offer_id":52468192116956,"sku":"PMC-STOP-051","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 25 (M6)","offer_id":52468192149724,"sku":"PMC-STOP-052","price":10.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 30 (M6)","offer_id":52468192182492,"sku":"PMC-STOP-053","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 30 (M8)","offer_id":52468192215260,"sku":"PMC-STOP-054","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 35 (M6)","offer_id":52468192248028,"sku":"PMC-STOP-055","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 35 (M8)","offer_id":52468192280796,"sku":"PMC-STOP-056","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 40 (M6)","offer_id":52468192313564,"sku":"PMC-STOP-057","price":24.9,"currency_code":"USD","in_stock":true},{"title":"Ø30 × 40 (M8)","offer_id":52468192346332,"sku":"PMC-STOP-058","price":24.9,"currency_code":"USD","in_stock":true},{"title":"Ø35 × 10 (M6)","offer_id":52468192379100,"sku":"PMC-STOP-059","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø35 × 10 (M8)","offer_id":52468192411868,"sku":"PMC-STOP-060","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø35 × 15 (M6)","offer_id":52468192444636,"sku":"PMC-STOP-061","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø35 × 15 (M8)","offer_id":52468192477404,"sku":"PMC-STOP-062","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø35 × 20 (M6)","offer_id":52468192510172,"sku":"PMC-STOP-063","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø35 × 20 (M8)","offer_id":52468192542940,"sku":"PMC-STOP-064","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø35 × 25 (M6)","offer_id":52468192575708,"sku":"PMC-STOP-065","price":14.9,"currency_code":"USD","in_stock":true},{"title":"Ø35 × 25 (M8)","offer_id":52468192608476,"sku":"PMC-STOP-066","price":14.9,"currency_code":"USD","in_stock":true},{"title":"Ø40 × 10 (M6)","offer_id":52468192641244,"sku":"PMC-STOP-067","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø40 × 10 (M8)","offer_id":52468192674012,"sku":"PMC-STOP-068","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø40 × 15 (M6)","offer_id":52468192706780,"sku":"PMC-STOP-069","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø40 × 15 (M8)","offer_id":52468192739548,"sku":"PMC-STOP-070","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø40 × 20 (M6)","offer_id":52468192772316,"sku":"PMC-STOP-071","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Ø40 × 20 (M8)","offer_id":52468192805084,"sku":"PMC-STOP-072","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Ø50 × 10 (M6)","offer_id":52468192837852,"sku":"PMC-STOP-073","price":42.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/mold-stop-posts-pack-of-4-main.png?v=1788924723"},{"product_id":"precision-angle-pins-cam-pins-suj2-58-hrc-pack-of-2","title":"Precision Angle Pins (Cam Pins), SUJ2 58 HRC — Pack of 2","description":"\u003cp\u003ePrecision angle pins (cam pins) for injection-mold slide actuation, sold in \u003cstrong\u003epacks of 2\u003c\/strong\u003e — slides come in pairs more often than not. Sizes are given as \u003cstrong\u003ediameter × length\u003c\/strong\u003e in millimetres.\u003c\/p\u003e\n\n\u003ch2\u003eWhat the angle pin controls\u003c\/h2\u003e\n\u003cp\u003eThe angle pin drives the slide open as the mold opens and pulls it closed as the mold shuts. Everything about slide timing comes from three numbers: pin diameter, pin angle, and the clearance in the slide hole. Get any of them wrong and the symptom shows up somewhere else — a slide that binds, a pin that bends, or a core that fouls the cavity on close.\u003c\/p\u003e\n\u003cp\u003eThe pin is deliberately not the strongest part of the mechanism. It is meant to take the side load and hand the holding job over to the locking heel once the slide is home. If your angle pins are bending, the heel is not taking the load — check the heel contact before you order thicker pins.\u003c\/p\u003e\n\n\u003ch2\u003eStandard specification\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSUJ2 bearing steel (equivalent to 100Cr6 \/ AISI 52100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTreatment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInduction hardened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e58 HRC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRetention diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003em5 — interference fit into the fixed half\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWorking diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ef6 — clearance fit through the slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e±0.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTip\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSpherical, SR = D\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiameters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ8, 10, 12, 14, 16, 18, 20, 25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40–250 mm, depending on diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThat is the standard specification for this part type. \u003cstrong\u003eWe confirm the material certificate and the measured hardness for your batch in writing before shipping\u003c\/strong\u003e — tell us if your incoming inspection tests to a particular standard and we will make the certificate match it.\u003c\/p\u003e\n\n\u003ch2\u003eThe two diameters are not the same fit\u003c\/h2\u003e\n\u003cp\u003eThis is the detail people get caught by. The retention section is m5 — an interference fit, pressed into the fixed half so the pin cannot move. The working section is f6 — a clearance fit, because the slide has to travel along it freely. They are the same nominal diameter and different tolerance bands.\u003c\/p\u003e\n\u003cp\u003eIf you ream both holes to the same size, you get either a pin that will not press home or a slide that rattles. Size the fixed-half hole to the m5 band and the slide hole to f6 with the running clearance your angle needs on top.\u003c\/p\u003e\n\n\u003ch2\u003eAngle and stroke\u003c\/h2\u003e\n\u003cp\u003eThese pins are supplied straight. The angle comes from how the hole is bored, not from the pin, so the same pin serves any angle in the normal 10°–25° range. Two things to hold in mind when you pick a length:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUsable stroke is roughly the engaged pin length multiplied by the tangent of the angle. A steeper angle gives more stroke per millimetre of mold opening but multiplies the side load on the pin and the heel.\u003c\/li\u003e\n\u003cli\u003eThe pin must stay engaged in the slide until the slide has cleared the undercut completely. Coming out early is the classic cause of a slide that fails to return, because nothing is left to pull it back.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove about 25° most tool builders move to a hydraulic or cam-driven slide rather than pushing the pin harder.\u003c\/p\u003e\n\n\u003ch2\u003eThe spherical tip is not decoration\u003c\/h2\u003e\n\u003cp\u003eSR = D\/2 means the tip is a full hemisphere. It exists so the pin enters the slide hole without catching if the slide has drifted a fraction out of position — which it will, on a worn tool or a cold start. A flat or chamfered tip catches the hole edge instead, and each catch peens the edge a little more.\u003c\/p\u003e\n\n\u003ch2\u003eFitting notes\u003c\/h2\u003e\n\u003cp\u003eCheck the pin runs square to the parting line in both planes before pressing home; an angle pin fitted a degree out of plane loads one side of the slide hole and wears an oval. When replacing, measure the old pin's engaged length rather than its overall length if it has been shortened at the head.\u003c\/p\u003e\n\n\u003ch2\u003eLarger sizes and headless pins\u003c\/h2\u003e\n\u003cp\u003eØ30 and lengths to 300 mm are stocked, along with headless angle pins with a threaded end, but a pair in those sizes exceeds what a flat parcel rate can carry sensibly. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e for those and we will price the freight against your destination.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. See \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times. Import duties and taxes are the buyer's responsibility — please read the duties section on that page before ordering.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Ø8 × 40","offer_id":52486583976156,"sku":"PMC-ANGP-001","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø8 × 45","offer_id":52486584008924,"sku":"PMC-ANGP-002","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø8 × 50","offer_id":52486584041692,"sku":"PMC-ANGP-003","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø8 × 55","offer_id":52486584074460,"sku":"PMC-ANGP-004","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø8 × 60","offer_id":52486584107228,"sku":"PMC-ANGP-005","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø8 × 65","offer_id":52486584139996,"sku":"PMC-ANGP-006","price":13.9,"currency_code":"USD","in_stock":true},{"title":"Ø8 × 70","offer_id":52486584172764,"sku":"PMC-ANGP-007","price":13.9,"currency_code":"USD","in_stock":true},{"title":"Ø8 × 80","offer_id":52486584205532,"sku":"PMC-ANGP-008","price":13.9,"currency_code":"USD","in_stock":true},{"title":"Ø8 × 85","offer_id":52486584238300,"sku":"PMC-ANGP-009","price":14.9,"currency_code":"USD","in_stock":true},{"title":"Ø8 × 90","offer_id":52486584271068,"sku":"PMC-ANGP-010","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø8 × 95","offer_id":52486584303836,"sku":"PMC-ANGP-011","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø8 × 100","offer_id":52486584336604,"sku":"PMC-ANGP-012","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø8 × 110","offer_id":52486584369372,"sku":"PMC-ANGP-013","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 45","offer_id":52486584402140,"sku":"PMC-ANGP-014","price":10.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 50","offer_id":52486584434908,"sku":"PMC-ANGP-015","price":10.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 55","offer_id":52486584467676,"sku":"PMC-ANGP-016","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 60","offer_id":52486584500444,"sku":"PMC-ANGP-017","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 65","offer_id":52486584533212,"sku":"PMC-ANGP-018","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 70","offer_id":52486584565980,"sku":"PMC-ANGP-019","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 80","offer_id":52486584598748,"sku":"PMC-ANGP-020","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 85","offer_id":52486584631516,"sku":"PMC-ANGP-021","price":13.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 90","offer_id":52486584664284,"sku":"PMC-ANGP-022","price":13.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 95","offer_id":52486584697052,"sku":"PMC-ANGP-023","price":14.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 100","offer_id":52486584729820,"sku":"PMC-ANGP-024","price":14.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 105","offer_id":52486584762588,"sku":"PMC-ANGP-025","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 110","offer_id":52486584795356,"sku":"PMC-ANGP-026","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 115","offer_id":52486584828124,"sku":"PMC-ANGP-027","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 120","offer_id":52486584860892,"sku":"PMC-ANGP-028","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø10 × 125","offer_id":52486584893660,"sku":"PMC-ANGP-029","price":17.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 50","offer_id":52486584926428,"sku":"PMC-ANGP-030","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 55","offer_id":52486584959196,"sku":"PMC-ANGP-031","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 60","offer_id":52486584991964,"sku":"PMC-ANGP-032","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 65","offer_id":52486585024732,"sku":"PMC-ANGP-033","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 70","offer_id":52486585057500,"sku":"PMC-ANGP-034","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 75","offer_id":52486585090268,"sku":"PMC-ANGP-035","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 80","offer_id":52486585123036,"sku":"PMC-ANGP-036","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 85","offer_id":52486585155804,"sku":"PMC-ANGP-037","price":13.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 90","offer_id":52486585188572,"sku":"PMC-ANGP-038","price":13.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 95","offer_id":52486585221340,"sku":"PMC-ANGP-039","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 100","offer_id":52486585254108,"sku":"PMC-ANGP-040","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 105","offer_id":52486585286876,"sku":"PMC-ANGP-041","price":14.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 110","offer_id":52486585319644,"sku":"PMC-ANGP-042","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 120","offer_id":52486585352412,"sku":"PMC-ANGP-043","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 125","offer_id":52486585385180,"sku":"PMC-ANGP-044","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 130","offer_id":52486585417948,"sku":"PMC-ANGP-045","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 140","offer_id":52486585450716,"sku":"PMC-ANGP-046","price":17.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 150","offer_id":52486585483484,"sku":"PMC-ANGP-047","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 160","offer_id":52486585516252,"sku":"PMC-ANGP-048","price":20.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 170","offer_id":52486585549020,"sku":"PMC-ANGP-049","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 180","offer_id":52486585581788,"sku":"PMC-ANGP-050","price":23.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 190","offer_id":52486585614556,"sku":"PMC-ANGP-051","price":25.9,"currency_code":"USD","in_stock":true},{"title":"Ø12 × 200","offer_id":52486585647324,"sku":"PMC-ANGP-052","price":27.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 50","offer_id":52486585680092,"sku":"PMC-ANGP-053","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 60","offer_id":52486585712860,"sku":"PMC-ANGP-054","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 70","offer_id":52486585745628,"sku":"PMC-ANGP-055","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 80","offer_id":52486585778396,"sku":"PMC-ANGP-056","price":13.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 90","offer_id":52486585811164,"sku":"PMC-ANGP-057","price":14.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 100","offer_id":52486585843932,"sku":"PMC-ANGP-058","price":14.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 110","offer_id":52486585876700,"sku":"PMC-ANGP-059","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 120","offer_id":52486585909468,"sku":"PMC-ANGP-060","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 130","offer_id":52486585942236,"sku":"PMC-ANGP-061","price":17.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 140","offer_id":52486585975004,"sku":"PMC-ANGP-062","price":17.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 150","offer_id":52486586007772,"sku":"PMC-ANGP-063","price":18.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 160","offer_id":52486586040540,"sku":"PMC-ANGP-064","price":28.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 170","offer_id":52486586073308,"sku":"PMC-ANGP-065","price":27.9,"currency_code":"USD","in_stock":true},{"title":"Ø14 × 180","offer_id":52486586106076,"sku":"PMC-ANGP-066","price":29.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 60","offer_id":52486586138844,"sku":"PMC-ANGP-067","price":11.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 70","offer_id":52486586171612,"sku":"PMC-ANGP-068","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 75","offer_id":52486586204380,"sku":"PMC-ANGP-069","price":13.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 80","offer_id":52486586237148,"sku":"PMC-ANGP-070","price":13.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 85","offer_id":52486586269916,"sku":"PMC-ANGP-071","price":14.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 90","offer_id":52486586302684,"sku":"PMC-ANGP-072","price":14.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 95","offer_id":52486586335452,"sku":"PMC-ANGP-073","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 100","offer_id":52486586368220,"sku":"PMC-ANGP-074","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 105","offer_id":52486586400988,"sku":"PMC-ANGP-075","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 110","offer_id":52486586433756,"sku":"PMC-ANGP-076","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 115","offer_id":52486586466524,"sku":"PMC-ANGP-077","price":17.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 120","offer_id":52486586499292,"sku":"PMC-ANGP-078","price":17.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 125","offer_id":52486586532060,"sku":"PMC-ANGP-079","price":18.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 130","offer_id":52486586564828,"sku":"PMC-ANGP-080","price":18.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 135","offer_id":52486586597596,"sku":"PMC-ANGP-081","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 140","offer_id":52486586630364,"sku":"PMC-ANGP-082","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 145","offer_id":52486586663132,"sku":"PMC-ANGP-083","price":20.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 150","offer_id":52486586695900,"sku":"PMC-ANGP-084","price":20.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 155","offer_id":52486586728668,"sku":"PMC-ANGP-085","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 160","offer_id":52486586761436,"sku":"PMC-ANGP-086","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 165","offer_id":52486586794204,"sku":"PMC-ANGP-087","price":23.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 170","offer_id":52486586826972,"sku":"PMC-ANGP-088","price":23.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 175","offer_id":52486586859740,"sku":"PMC-ANGP-089","price":24.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 180","offer_id":52486586892508,"sku":"PMC-ANGP-090","price":24.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 185","offer_id":52486586925276,"sku":"PMC-ANGP-091","price":25.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 190","offer_id":52486586958044,"sku":"PMC-ANGP-092","price":25.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 195","offer_id":52486586990812,"sku":"PMC-ANGP-093","price":26.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 200","offer_id":52486587023580,"sku":"PMC-ANGP-094","price":26.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 210","offer_id":52486587056348,"sku":"PMC-ANGP-095","price":27.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 220","offer_id":52486587089116,"sku":"PMC-ANGP-096","price":29.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 230","offer_id":52486587121884,"sku":"PMC-ANGP-097","price":31.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 240","offer_id":52486587154652,"sku":"PMC-ANGP-098","price":33.9,"currency_code":"USD","in_stock":true},{"title":"Ø16 × 250","offer_id":52486587187420,"sku":"PMC-ANGP-099","price":35.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 80","offer_id":52486587220188,"sku":"PMC-ANGP-100","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 90","offer_id":52486587252956,"sku":"PMC-ANGP-101","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 100","offer_id":52486587285724,"sku":"PMC-ANGP-102","price":20.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 110","offer_id":52486587318492,"sku":"PMC-ANGP-103","price":25.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 120","offer_id":52486587351260,"sku":"PMC-ANGP-104","price":26.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 130","offer_id":52486587384028,"sku":"PMC-ANGP-105","price":27.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 140","offer_id":52486587416796,"sku":"PMC-ANGP-106","price":29.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 150","offer_id":52486587449564,"sku":"PMC-ANGP-107","price":30.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 160","offer_id":52486587482332,"sku":"PMC-ANGP-108","price":30.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 170","offer_id":52486587515100,"sku":"PMC-ANGP-109","price":30.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 180","offer_id":52486587547868,"sku":"PMC-ANGP-110","price":33.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 190","offer_id":52486587580636,"sku":"PMC-ANGP-111","price":39.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 200","offer_id":52486587613404,"sku":"PMC-ANGP-112","price":40.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 210","offer_id":52486587646172,"sku":"PMC-ANGP-113","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Ø18 × 220","offer_id":52486587678940,"sku":"PMC-ANGP-114","price":44.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 60","offer_id":52486587711708,"sku":"PMC-ANGP-115","price":13.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 70","offer_id":52486587744476,"sku":"PMC-ANGP-116","price":14.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 80","offer_id":52486587777244,"sku":"PMC-ANGP-117","price":15.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 90","offer_id":52486587810012,"sku":"PMC-ANGP-118","price":17.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 100","offer_id":52486587842780,"sku":"PMC-ANGP-119","price":18.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 105","offer_id":52486587875548,"sku":"PMC-ANGP-120","price":18.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 110","offer_id":52486587908316,"sku":"PMC-ANGP-121","price":18.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 115","offer_id":52486587941084,"sku":"PMC-ANGP-122","price":18.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 120","offer_id":52486587973852,"sku":"PMC-ANGP-123","price":20.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 125","offer_id":52486588006620,"sku":"PMC-ANGP-124","price":20.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 130","offer_id":52486588039388,"sku":"PMC-ANGP-125","price":20.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 135","offer_id":52486588072156,"sku":"PMC-ANGP-126","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 140","offer_id":52486588104924,"sku":"PMC-ANGP-127","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 145","offer_id":52486588137692,"sku":"PMC-ANGP-128","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 150","offer_id":52486588170460,"sku":"PMC-ANGP-129","price":23.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 155","offer_id":52486588203228,"sku":"PMC-ANGP-130","price":24.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 160","offer_id":52486588235996,"sku":"PMC-ANGP-131","price":24.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 165","offer_id":52486588268764,"sku":"PMC-ANGP-132","price":25.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 170","offer_id":52486588301532,"sku":"PMC-ANGP-133","price":26.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 175","offer_id":52486588334300,"sku":"PMC-ANGP-134","price":27.9,"currency_code":"USD","in_stock":true},{"title":"Ø20 × 180","offer_id":52486588367068,"sku":"PMC-ANGP-135","price":29.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 70","offer_id":52486588399836,"sku":"PMC-ANGP-136","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 80","offer_id":52486588432604,"sku":"PMC-ANGP-137","price":21.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 90","offer_id":52486588465372,"sku":"PMC-ANGP-138","price":23.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 100","offer_id":52486588498140,"sku":"PMC-ANGP-139","price":24.9,"currency_code":"USD","in_stock":true},{"title":"Ø25 × 110","offer_id":52486588530908,"sku":"PMC-ANGP-140","price":26.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/precision-angle-pins-pack-of-2-main.png?v=1789013377"},{"product_id":"a-type-lifter-bases-p20-nitrided-single-side-t-slot","title":"A-Type Lifter Bases, P20 Nitrided — Single-Side T-Slot","description":"\u003cp\u003eA-type lifter bases (angle lifter seats) with a single-side T-slot, supplied singly. Sizes are given as \u003cstrong\u003ebase × base × height\u003c\/strong\u003e in millimetres, with the mounting thread in brackets where the size has one.\u003c\/p\u003e\n\n\u003ch2\u003eWhat the lifter base does\u003c\/h2\u003e\n\u003cp\u003eThe lifter base is the sliding foot that carries an angle lifter in the ejector plate. As the ejector plate rises, the lifter rod is driven up at its angle and the base slides sideways in its slot to absorb the horizontal component. Every millimetre of sideways travel the rod demands has to be available in the base's slot — that is the whole job.\u003c\/p\u003e\n\u003cp\u003eTwo things follow from that. The base has to slide freely under load without picking up, which is why these are nitrided rather than left soft. And the slot has to be long enough for the full stroke: a base that runs out of travel does not fail gently, it jams and bends the lifter rod on the same shot.\u003c\/p\u003e\n\n\u003ch2\u003eStandard specification\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eP20 mould steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTreatment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNitrided\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSurface hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e900 HV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA-type, single-side T-slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBase sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10, 11, 12, 26 and 32 mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeights\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24–120 mm, depending on base size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting thread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM6 on Ø26 bases, M8 on Ø32; smaller sizes are unthreaded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupplied\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDanyang, Jiangsu, China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThat is the standard specification for this part type. Note that the surface figure is quoted in Vickers, as a nitrided case should be — the case is too shallow for a meaningful Rockwell C reading. \u003cstrong\u003eWe confirm the material certificate and the measured hardness for your batch in writing before shipping.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing a height\u003c\/h2\u003e\n\u003cp\u003eHeight sets how far the base sits below the lifter rod, and it interacts with your plate stack rather than standing alone. Measure from the ejector plate face to the underside of the rod at the home position, with the plate fully returned. If you are replacing a base on a running tool, measure the old one — do not scale from the drawing, because bases are frequently machined down at fitting.\u003c\/p\u003e\n\n\u003ch2\u003eSingle-side T-slot: orientation matters\u003c\/h2\u003e\n\u003cp\u003eAn A-type base has the T-slot on one side only. It must be installed with the slot facing the direction the base needs to travel, which is the direction the lifter leans. Fitted a quarter turn out, the base binds on the first ejection stroke.\u003c\/p\u003e\n\u003cp\u003eThis is worth a moment at assembly rather than at first trial. If your layout needs travel in both directions, or the lifter angle is compound, a B-type or peanut-head base is the right part instead — ask and we will quote it.\u003c\/p\u003e\n\n\u003ch2\u003eNot listed here\u003c\/h2\u003e\n\u003cp\u003eSeveral variants are deliberately not in the size selector:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 × 14 bases\u003c\/strong\u003e and other sizes carrying an \"A\" sub-type suffix in the maker's code. We have not confirmed what that suffix designates, and we would rather quote it than guess.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRectangular bases\u003c\/strong\u003e such as 32 × 48. The two base dimensions are not interchangeable on a single-side T-slot, and the maker's code does not make the orientation unambiguous. Tell us which face carries the slot and we will confirm it in writing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB-type, peanut-head, JIS and adjustable bases\u003c\/strong\u003e, and matching lifter rods and guides.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e for any of these with your dimensions and lifter angle.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eInternational freight is calculated on packed chargeable weight. See \u003ca href=\"\/pages\/shipping-delivery\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e for destinations and transit times. Import duties and taxes are the buyer's responsibility — please read the duties section on that page before ordering.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"10 × 10 × 25","offer_id":52487191658716,"sku":"PMC-LIFT-001","price":7.9,"currency_code":"USD","in_stock":true},{"title":"10 × 10 × 30","offer_id":52487191691484,"sku":"PMC-LIFT-002","price":7.9,"currency_code":"USD","in_stock":true},{"title":"10 × 10 × 35","offer_id":52487191724252,"sku":"PMC-LIFT-003","price":7.9,"currency_code":"USD","in_stock":true},{"title":"10 × 10 × 40","offer_id":52487191757020,"sku":"PMC-LIFT-004","price":7.9,"currency_code":"USD","in_stock":true},{"title":"10 × 10 × 45","offer_id":52487191789788,"sku":"PMC-LIFT-005","price":7.9,"currency_code":"USD","in_stock":true},{"title":"10 × 10 × 50","offer_id":52487191822556,"sku":"PMC-LIFT-006","price":7.9,"currency_code":"USD","in_stock":true},{"title":"10 × 10 × 55","offer_id":52487191855324,"sku":"PMC-LIFT-007","price":7.9,"currency_code":"USD","in_stock":true},{"title":"10 × 10 × 60","offer_id":52487191888092,"sku":"PMC-LIFT-008","price":8.9,"currency_code":"USD","in_stock":true},{"title":"10 × 10 × 70","offer_id":52487191920860,"sku":"PMC-LIFT-009","price":8.9,"currency_code":"USD","in_stock":true},{"title":"10 × 10 × 80","offer_id":52487191953628,"sku":"PMC-LIFT-010","price":8.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 25","offer_id":52487191986396,"sku":"PMC-LIFT-011","price":7.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 30","offer_id":52487192019164,"sku":"PMC-LIFT-012","price":7.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 35","offer_id":52487192051932,"sku":"PMC-LIFT-013","price":7.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 40","offer_id":52487192084700,"sku":"PMC-LIFT-014","price":7.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 45","offer_id":52487192117468,"sku":"PMC-LIFT-015","price":7.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 48","offer_id":52487192150236,"sku":"PMC-LIFT-016","price":7.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 50","offer_id":52487192183004,"sku":"PMC-LIFT-017","price":8.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 55","offer_id":52487192215772,"sku":"PMC-LIFT-018","price":8.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 58","offer_id":52487192248540,"sku":"PMC-LIFT-019","price":8.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 60","offer_id":52487192281308,"sku":"PMC-LIFT-020","price":8.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 65","offer_id":52487192314076,"sku":"PMC-LIFT-021","price":8.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 70","offer_id":52487192346844,"sku":"PMC-LIFT-022","price":9.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 75","offer_id":52487192379612,"sku":"PMC-LIFT-023","price":9.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 80","offer_id":52487192412380,"sku":"PMC-LIFT-024","price":9.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 90","offer_id":52487192445148,"sku":"PMC-LIFT-025","price":10.9,"currency_code":"USD","in_stock":true},{"title":"11 × 11 × 100","offer_id":52487192477916,"sku":"PMC-LIFT-026","price":11.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 25","offer_id":52487192510684,"sku":"PMC-LIFT-027","price":7.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 30","offer_id":52487192543452,"sku":"PMC-LIFT-028","price":7.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 35","offer_id":52487192576220,"sku":"PMC-LIFT-029","price":7.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 38","offer_id":52487192608988,"sku":"PMC-LIFT-030","price":7.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 40","offer_id":52487192641756,"sku":"PMC-LIFT-031","price":7.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 45","offer_id":52487192674524,"sku":"PMC-LIFT-032","price":8.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 48","offer_id":52487192707292,"sku":"PMC-LIFT-033","price":8.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 50","offer_id":52487192740060,"sku":"PMC-LIFT-034","price":8.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 53","offer_id":52487192772828,"sku":"PMC-LIFT-035","price":9.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 55","offer_id":52487192805596,"sku":"PMC-LIFT-036","price":9.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 58","offer_id":52487192838364,"sku":"PMC-LIFT-037","price":9.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 60","offer_id":52487192871132,"sku":"PMC-LIFT-038","price":9.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 65","offer_id":52487192903900,"sku":"PMC-LIFT-039","price":10.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 68","offer_id":52487192936668,"sku":"PMC-LIFT-040","price":10.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 70","offer_id":52487192969436,"sku":"PMC-LIFT-041","price":10.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 75","offer_id":52487193002204,"sku":"PMC-LIFT-042","price":11.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 80","offer_id":52487193034972,"sku":"PMC-LIFT-043","price":11.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 90","offer_id":52487193067740,"sku":"PMC-LIFT-044","price":11.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 100","offer_id":52487193100508,"sku":"PMC-LIFT-045","price":11.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 110","offer_id":52487193133276,"sku":"PMC-LIFT-046","price":12.9,"currency_code":"USD","in_stock":true},{"title":"12 × 12 × 120","offer_id":52487193166044,"sku":"PMC-LIFT-047","price":13.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 30 (M6)","offer_id":52487193198812,"sku":"PMC-LIFT-048","price":12.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 35 (M6)","offer_id":52487193231580,"sku":"PMC-LIFT-049","price":12.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 38 (M6)","offer_id":52487193264348,"sku":"PMC-LIFT-050","price":12.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 40 (M6)","offer_id":52487193297116,"sku":"PMC-LIFT-051","price":12.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 45 (M6)","offer_id":52487193329884,"sku":"PMC-LIFT-052","price":13.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 50 (M6)","offer_id":52487193362652,"sku":"PMC-LIFT-053","price":13.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 55 (M6)","offer_id":52487193395420,"sku":"PMC-LIFT-054","price":13.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 60 (M6)","offer_id":52487193428188,"sku":"PMC-LIFT-055","price":13.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 65 (M6)","offer_id":52487193460956,"sku":"PMC-LIFT-056","price":14.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 70 (M6)","offer_id":52487193493724,"sku":"PMC-LIFT-057","price":14.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 75 (M6)","offer_id":52487193526492,"sku":"PMC-LIFT-058","price":15.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 80 (M6)","offer_id":52487193559260,"sku":"PMC-LIFT-059","price":15.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 90 (M6)","offer_id":52487193592028,"sku":"PMC-LIFT-060","price":15.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 100 (M6)","offer_id":52487193624796,"sku":"PMC-LIFT-061","price":16.9,"currency_code":"USD","in_stock":true},{"title":"26 × 26 × 110 (M6)","offer_id":52487193657564,"sku":"PMC-LIFT-062","price":16.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 24 (M8)","offer_id":52487193690332,"sku":"PMC-LIFT-063","price":14.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 30 (M8)","offer_id":52487193723100,"sku":"PMC-LIFT-064","price":15.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 35 (M8)","offer_id":52487193755868,"sku":"PMC-LIFT-065","price":15.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 38 (M8)","offer_id":52487193788636,"sku":"PMC-LIFT-066","price":15.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 40 (M8)","offer_id":52487193821404,"sku":"PMC-LIFT-067","price":15.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 45 (M8)","offer_id":52487193854172,"sku":"PMC-LIFT-068","price":15.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 50 (M8)","offer_id":52487193886940,"sku":"PMC-LIFT-069","price":16.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 55 (M8)","offer_id":52487193919708,"sku":"PMC-LIFT-070","price":16.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 60 (M8)","offer_id":52487193952476,"sku":"PMC-LIFT-071","price":16.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 70 (M8)","offer_id":52487193985244,"sku":"PMC-LIFT-072","price":17.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 80 (M8)","offer_id":52487194018012,"sku":"PMC-LIFT-073","price":18.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 90 (M8)","offer_id":52487194050780,"sku":"PMC-LIFT-074","price":18.9,"currency_code":"USD","in_stock":true},{"title":"32 × 32 × 100 (M8)","offer_id":52487194083548,"sku":"PMC-LIFT-075","price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/01-a-type-lifter-base-hero_c9c4d9dc-7eb9-4cf1-a9b7-d89adddd1af2.png?v=1789303919"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/collections\/mold-stop-posts-pack-of-4-main_7f4d52b5-05b9-445b-93c6-8ed929b15d1d.png?v=1789030740","url":"https:\/\/privleymold.com\/collections\/shop-standard-mold-components.oembed","provider":"Privley Mold Components","version":"1.0","type":"link"}