{"title":"Core Mold Components","description":"\u003cp\u003eA focused RFQ catalog of the first mold-component families prepared for international buyers. Use this collection when you need commonly requested ejector, guide, spring, sprue, locating, fastening, support or runner components.\u003c\/p\u003e\u003ch2\u003eBefore requesting a quote\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSelect the closest product family.\u003c\/li\u003e\n\u003cli\u003eProvide the complete size designation, drawing or reference part number.\u003c\/li\u003e\n\u003cli\u003eState material, treatment, hardness, tolerance, quantity and destination.\u003c\/li\u003e\n\u003cli\u003eIdentify inspection, packaging and delivery requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are supplied by written quotation. Website diagrams and descriptions support identification but do not replace final technical approval.\u003c\/p\u003e","products":[{"product_id":"yellow-65mn-rectangular-die-spring","title":"Yellow 65Mn Rectangular-Wire Die Spring","description":"\u003cp\u003e\u003cstrong\u003eYellow 65Mn rectangular-wire die spring\u003c\/strong\u003e for injection molds, stamping dies, fixtures, and other industrial compression applications. This product is quoted by confirmed dimensions, working stroke, and load requirement.\u003c\/p\u003e\u003ch2\u003eDimensions required for quotation\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOutside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eID\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eL₀\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFree length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ea × b\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRectangular-wire cross-section, when available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWorking stroke\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNormal operating compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRequired load\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLoad at the specified compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired for USD quotation and freight calculation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eImportant color note\u003c\/h2\u003e\u003cp\u003eYellow is treated as a supplier identification feature only. Color codes are not assumed to match ISO, JIS, US, or another manufacturer's load classification. Final load, spring rate, maximum compression, solid height, and service-life data must be confirmed for the selected size.\u003c\/p\u003e\u003ch2\u003eOrdering note\u003c\/h2\u003e\u003cp\u003ePlease provide the existing spring code, dimensional drawing, or measured OD, ID, free length, stroke, and load. Material is listed as 65Mn based on the source product information; any certificate, hardness, coating, or fatigue-life requirement must be stated in the quotation request.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInquiry-only product:\u003c\/strong\u003e final USD price, lead time, packing, freight, and inspection scope will be stated in the formal quotation or proforma invoice.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Default Title","offer_id":52126010376412,"sku":"PMC-SPR-65MN-Y","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/65mn-rectangular-die-spring-dimension-diagram_caf05b25-62e0-4a9a-9967-bfdd67faadec.png?v=1785379166"},{"product_id":"mold-support-pillar-spacer-column","title":"Mold Support Pillar \/ Spacer Column – Standard or Custom","description":"\u003cp\u003e\u003cstrong\u003eMold support pillar \/ spacer column\u003c\/strong\u003e for supporting mold plates, reducing plate deflection, and maintaining the required spacing around the mold-foot area. Standard and drawing-based configurations are supplied by quotation.\u003c\/p\u003e\u003ch2\u003eInformation required for quotation\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutside diameter (D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall length (L)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal feature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSolid, through bore, counterbore, or internal thread M × P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnd-face requirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eState flatness, parallelism, chamfer, or shoulder details when critical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial and hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTo be confirmed from the drawing or application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSurface treatment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eState any grinding, black oxide, plating, or other requirement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired for pricing and freight calculation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eAvailable supply formats\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid cylindrical support pillars\u003c\/li\u003e\n\u003cli\u003eThrough-bored or internally threaded spacer columns\u003c\/li\u003e\n\u003cli\u003eCounterbored or shoulder-type configurations\u003c\/li\u003e\n\u003cli\u003eReplacement matching from a drawing, dimensions, or sample\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOrdering note\u003c\/h2\u003e\u003cp\u003eThis is an inquiry-only industrial component. Final material, hardness, tolerances, unit price, lead time, packaging, inspection scope, and freight will be stated in the formal quotation or proforma invoice.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Default Title","offer_id":52126010507484,"sku":"PMC-MSP-SC","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/mold-support-pillar-dimension-diagram_3ccec7f2-f4f3-4b29-8b63-699cb4540098.png?v=1785380179"},{"product_id":"skd61-nitrided-ejector-pin","title":"SKD61 Nitrided Standard Ejector Pin – Metric, RFQ-Based","description":"\u003cp\u003e\u003cstrong\u003eSKD61 nitrided standard ejector pin\u003c\/strong\u003e for injection molds, die-casting molds, mold repair, and replacement-part sourcing. The product is supplied by confirmed dimensions and remains inquiry-only until specification, quantity, and inspection requirements are approved.\u003c\/p\u003e\u003ch2\u003eInformation required for quotation\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePin diameter (D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall length (L)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHead diameter (D1)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired for replacement matching or non-standard heads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHead thickness (H)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired for replacement matching or non-standard heads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSKD61 is source-listed; equivalent grade requests must be stated separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSurface treatment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNitrided; treatment details require confirmation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eState required core hardness and surface hardness when critical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTolerance and straightness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eState critical diameter, length, straightness, and tip-finish requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired for USD quotation and freight calculation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eAvailable supply formats\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard metric ejector pins\u003c\/li\u003e\n\u003cli\u003eCut-to-length configurations\u003c\/li\u003e\n\u003cli\u003eReplacement matching from a part number, drawing, or sample\u003c\/li\u003e\n\u003cli\u003eMixed quantities for mold maintenance and BOM sourcing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality confirmation\u003c\/h2\u003e\u003cp\u003eMaterial, nitriding, hardness, dimensional inspection, and traceability documents are supplied only according to the scope agreed in the quotation. No tolerance or certificate is assumed unless it is included in the confirmed order specification.\u003c\/p\u003e\u003ch2\u003eOrdering note\u003c\/h2\u003e\u003cp\u003eFinal dimensions, unit price, lead time, freight, packaging, and inspection scope will be stated in the formal quotation or proforma invoice.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Default Title","offer_id":52126010638556,"sku":"PMC-EP-SKD61-N","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/skd61-standard-ejector-pin-dimension-diagram_3b1e3e4a-75c5-4354-9518-0759d6840902.png?v=1785380222"},{"product_id":"grade-12-9-shoulder-screw-stripper-bolt","title":"Grade 12.9 Metric Shoulder Screw \/ Stripper Bolt","description":"\u003cp\u003e\u003cstrong\u003eGrade 12.9 metric shoulder screw\u003c\/strong\u003e, also known as a stripper bolt, stop bolt, or equal-height screw, for mold plates, slide assemblies, guide structures, fixtures, and positioning applications.\u003c\/p\u003e\u003ch2\u003eDocumented reference information\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProperty class reference: 12.9\u003c\/li\u003e\n\u003cli\u003eFastener family: metric shoulder screw \/ stripper bolt\u003c\/li\u003e\n\u003cli\u003eReference shoulder diameters visible in the current source material: D13, D16, and D20\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe complete dimensions, applicable standard, material, mechanical-property evidence and finish remain subject to quotation confirmation.\u003c\/p\u003e\u003ch2\u003eInformation required for quotation\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShoulder diameter (D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConfirm D13, D16, D20, or another required diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShoulder length (L)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread size and pitch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHead dimensions and drive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConfirm socket size and head style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired when different from the standard series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSurface finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConfirm black oxide or another required treatment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired for quotation and freight calculation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eOrdering note\u003c\/h2\u003e\u003cp\u003ePlease send the complete size designation, drawing, existing sample dimensions, or a clear reference photograph. Thread dimensions and shoulder length must be confirmed before procurement or production.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInquiry-only product:\u003c\/strong\u003e final specification, unit price, currency, lead time, packaging, freight, and inspection scope will be stated in the formal quotation or proforma invoice.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Default Title","offer_id":52126010704092,"sku":"PMC-SCR-129-SH","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/grade-12-9-shoulder-screw-dimension-diagram_68b317c3-d1d6-4736-af7e-c9a62306b988.png?v=1785379574"},{"product_id":"blue-65mn-rectangular-die-spring","title":"Blue 65Mn Rectangular-Wire Die Spring","description":"\u003cp\u003e\u003cstrong\u003eBlue 65Mn rectangular-wire die spring\u003c\/strong\u003e for injection molds, stamping dies, fixtures, and other industrial compression applications. This product is quoted by confirmed dimensions, working stroke, and load requirement.\u003c\/p\u003e\u003ch2\u003eDimensions required for quotation\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOutside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eID\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eL₀\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFree length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ea × b\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRectangular-wire cross-section, when available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWorking stroke\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNormal operating compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRequired load\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLoad at the specified compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired for USD quotation and freight calculation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eImportant color note\u003c\/h2\u003e\u003cp\u003eBlue is treated as a supplier identification feature only. Color codes are not assumed to match ISO, JIS, US, or another manufacturer's load classification. Final load, spring rate, maximum compression, solid height, and service-life data must be confirmed for the selected size.\u003c\/p\u003e\u003ch2\u003eOrdering note\u003c\/h2\u003e\u003cp\u003ePlease provide the existing spring code, dimensional drawing, or measured OD, ID, free length, stroke, and load. Material is listed as 65Mn based on the source product information; any certificate, hardness, coating, or fatigue-life requirement must be stated in the quotation request.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInquiry-only product:\u003c\/strong\u003e final USD price, lead time, packing, freight, and inspection scope will be stated in the formal quotation or proforma invoice.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Default Title","offer_id":52126010769628,"sku":"PMC-SPR-65MN-B","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/65mn-rectangular-die-spring-dimension-diagram_3667b511-ce62-4c32-a433-432c5a9fa6c1.png?v=1785379184"},{"product_id":"c-type-sprue-bushing-mold-nozzle","title":"C-Type Sprue Bushing \/ Mold Nozzle for Injection Molds","description":"\u003cp\u003e\u003cstrong\u003eC-Type sprue bushing \/ mold nozzle\u003c\/strong\u003e for transferring molten resin from the injection-molding machine nozzle into the mold runner system. The product is supplied by confirmed machine and mold-interface dimensions.\u003c\/p\u003e\u003ch2\u003eDimensions required for quotation\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBody outside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHead outside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eH\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHead thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ed1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNozzle-side sprue bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ed2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMold-side sprue bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eR\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSpherical nozzle-seat radius\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSprue taper\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIncluded angle or inlet\/outlet bore combination\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eInterface information to confirm\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInjection-machine nozzle radius and nozzle-tip diameter\u003c\/li\u003e\n\u003cli\u003eLocating-ring and mold-plate interface\u003c\/li\u003e\n\u003cli\u003eMounting method and any bolt-hole or anti-rotation features\u003c\/li\u003e\n\u003cli\u003eMaterial, heat treatment, hardness, and surface finish\u003c\/li\u003e\n\u003cli\u003eRequired runner release, polishing, or coating requirements\u003c\/li\u003e\n\u003cli\u003eQuantity, destination, and inspection-document requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eReplacement matching\u003c\/h2\u003e\u003cp\u003eFor replacement applications, submit the existing sprue-bushing code, machine model, dimensional drawing, or a measured sample. A similar outside shape does not guarantee that the spherical radius, sprue taper, and nozzle alignment are compatible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInquiry-only product:\u003c\/strong\u003e final USD price, lead time, freight, material, hardness, tolerance, and inspection scope will be confirmed in the formal quotation or proforma invoice.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Default Title","offer_id":52126011326684,"sku":"PMC-SB-C","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/c-type-sprue-bushing-dimension-diagram_a2104696-10e6-4048-acf6-a92b813d277d.png?v=1785379463"},{"product_id":"hardened-runner-puller-pin","title":"Hardened Runner Puller Pin \/ Sprue Puller – Custom End Geometry","description":"\u003cp\u003e\u003cstrong\u003eHardened runner puller pin \/ sprue puller\u003c\/strong\u003e for retaining and extracting cold runners or sprues during mold opening. Ball-head, mushroom-head, hook, groove, undercut, and drawing-based end geometries can be evaluated by quotation.\u003c\/p\u003e\u003ch2\u003eInformation required for quotation\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShaft diameter (D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall length (L)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHead diameter and thickness (H × T)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired when a headed configuration is used\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePuller-end geometry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eProvide ball, mushroom, hook, groove, undercut, or drawing dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial and hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConfirm required grade, heat treatment, and hardness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCritical tolerances\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eState shaft, groove, undercut, concentricity, or straightness requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired for pricing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eReplacement matching\u003c\/h2\u003e\u003cp\u003eFor replacement sourcing, provide an existing part number, a dimensioned drawing, or clear photographs with measurements. Similar-looking puller ends can have different release behavior, so the end geometry must be confirmed before production.\u003c\/p\u003e\u003ch2\u003eOrdering note\u003c\/h2\u003e\u003cp\u003eThis product remains inquiry-only. Material, hardness, dimensions, tolerances, unit price, lead time, inspection documents, packaging, and freight will be confirmed in the formal quotation.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Default Title","offer_id":52126011424988,"sku":"PMC-RPP-H","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/hardened-runner-puller-pin-dimension-diagram_06988f21-d47d-4472-8c97-8af8486bd0c2.png?v=1785380204"},{"product_id":"a-b-type-mold-locating-ring","title":"A-Type \/ B-Type Injection Mold Locating Ring","description":"\u003cp\u003e\u003cstrong\u003eA-Type \/ B-Type injection mold locating ring\u003c\/strong\u003e for aligning the mold with the injection-molding machine platen and nozzle center. This product is supplied by specification and remains inquiry-only until the machine interface and mounting dimensions are confirmed.\u003c\/p\u003e\u003ch2\u003eDimensions required for quotation\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOutside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eID\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCenter-bore diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlate thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBolt-circle diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBolt-hole diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHole quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumber and angular arrangement of mounting holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRegister or step diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRegister or step height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eAlso confirm\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachine standard or existing locating-ring reference\u003c\/li\u003e\n\u003cli\u003eSprue-bushing and nozzle interface\u003c\/li\u003e\n\u003cli\u003eMaterial and required surface treatment\u003c\/li\u003e\n\u003cli\u003eMounting-hole type, including through holes or counterbores\u003c\/li\u003e\n\u003cli\u003eRequired quantity and destination country\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOrdering note\u003c\/h2\u003e\u003cp\u003eThe terms A-Type and B-Type can vary between suppliers. Please submit a drawing, dimensional sketch, machine model, or sample photograph before order approval. No fit, tolerance, material, hardness, or surface treatment is assumed unless it appears in the formal quotation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInquiry-only product:\u003c\/strong\u003e final USD price, lead time, freight, inspection scope, and trade terms will be stated in the quotation or proforma invoice.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Default Title","offer_id":52126011457756,"sku":"PMC-LR-AB","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/ab-type-mold-locating-ring-dimension-diagram_50a51cdf-f09f-4f12-a7d8-03616bb6c947.png?v=1785379061"},{"product_id":"shoulder-guide-bushing-20cr-suj2","title":"20Cr \/ SUJ2 Shoulder Guide Bushing for Mold Bases","description":"\u003cp\u003e\u003cstrong\u003eShoulder guide bushing for mold bases\u003c\/strong\u003e, with 20Cr or SUJ2 material options shown in the source information. Used with mating guide posts to guide moving mold plates and maintain alignment during opening and closing.\u003c\/p\u003e\u003ch2\u003eDimensions required for quotation\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBore diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBody outside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlange outside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlange thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBody length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eTechnical information to confirm\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMating guide-post diameter, material, hardness, and surface finish\u003c\/li\u003e\n\u003cli\u003eBore fit and outside-diameter installation fit\u003c\/li\u003e\n\u003cli\u003ePress-fit, slip-fit, oil-groove, or lubrication requirements\u003c\/li\u003e\n\u003cli\u003eHeat treatment and required core or surface hardness\u003c\/li\u003e\n\u003cli\u003eChamfer, lead-in, flange geometry, and critical tolerances\u003c\/li\u003e\n\u003cli\u003eQuantity, inspection scope, and destination country\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaterial note\u003c\/h2\u003e\u003cp\u003e20Cr and SUJ2 are treated as alternative material options rather than equivalent grades. The selected material, heat-treatment route, hardness, and certificate requirements must be stated in the formal quotation.\u003c\/p\u003e\u003ch2\u003eReplacement matching\u003c\/h2\u003e\u003cp\u003eFor replacement parts, submit the existing guide-bushing code, mating guide-post dimensions, a dimensional drawing, or clear measurement photographs. Compatibility with a named mold-base system is not assumed unless confirmed in writing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInquiry-only product:\u003c\/strong\u003e final USD price, lead time, freight, tolerance, material certification, and inspection requirements will be stated in the quotation or proforma invoice.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Default Title","offer_id":52126011588828,"sku":"PMC-GB-SH-20CR-SUJ2","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/shoulder-guide-bushing-dimension-diagram_3be82081-58c3-411d-9fb8-b3f23a33e2af.png?v=1785379370"},{"product_id":"skd61-stepped-ejector-pin","title":"SKD61 Nitrided Stepped Ejector Pin – B-Type \/ Multi-Section","description":"\u003cp\u003e\u003cstrong\u003eSKD61 nitrided stepped ejector pin\u003c\/strong\u003e for injection molds, die-casting molds, mold repair, and replacement-part sourcing. The currently documented product family includes B-type, double-step, three-section, and supported stepped configurations.\u003c\/p\u003e\u003ch2\u003eDimension notation\u003c\/h2\u003e\u003cp\u003eThe documented notation is interpreted as \u003cstrong\u003eP × D × L – N\u003c\/strong\u003e.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTip diameter \/ working-end diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRetention or shoulder diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eH\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHead diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHead thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eN\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRetention length from the head-side reference to the stepped transition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eL − N\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEffective small-diameter tip length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eExample: \u003ccode\u003eP0.8 × D3 × L150 – N50\u003c\/code\u003e means a 0.8 mm tip diameter, 3 mm retention diameter, 150 mm overall length, and 50 mm retention length.\u003c\/p\u003e\u003ch2\u003eReference P \/ D \/ H \/ T groups currently documented\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eP\u003c\/th\u003e\n\u003cth\u003eD\u003c\/th\u003e\n\u003cth\u003eH\u003c\/th\u003e\n\u003cth\u003eT\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.0, 1.2, 1.5, 2.0\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.0, 2.5, 3.0\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.0, 4.0\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eAll dimensions are in millimeters. Where the same P value appears with different D values, the complete P × D combination must be stated.\u003c\/p\u003e\u003ch2\u003eReference L \/ N combinations currently documented\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eL125 \/ N25\u003c\/li\u003e\n\u003cli\u003eL160 \/ N50\u003c\/li\u003e\n\u003cli\u003eL160 \/ N75\u003c\/li\u003e\n\u003cli\u003eL200 \/ N75\u003c\/li\u003e\n\u003cli\u003eL200 \/ N100\u003c\/li\u003e\n\u003cli\u003eL200 \/ N125\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdditional combinations such as L150, L250 and N70 appear in the available option material. These must be re-confirmed against the current quotation basis or drawing before order approval.\u003c\/p\u003e\u003ch2\u003eInformation required for quotation\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComplete size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eP × D × L – N, plus H and T when non-standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSKD61 requested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSurface treatment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNitrided requested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired core and surface values must be confirmed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eState critical diameter, straightness, and length tolerances\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired for quotation and freight calculation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eInquiry-only product:\u003c\/strong\u003e hardness, tolerances, option availability, packaging, lead time, inspection documents, and any symbols in the original reference table remain subject to supplier confirmation and the formal quotation.\u003c\/p\u003e","brand":"Privley Mold Components","offers":[{"title":"Default Title","offer_id":52126011687132,"sku":"PMC-EP-SKD61-STP","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/7650\/9916\/files\/skd61-stepped-ejector-dimension-diagram_b8240051-0542-4dc2-8722-6434dbfb488e.png?v=1785378981"}],"url":"https:\/\/privleymold.com\/collections\/core-mold-components.oembed","provider":"Privley Mold Components","version":"1.0","type":"link"}